Anritsu Company VectorStar ME7848A-0140 Hızlı Başlangıç Kılavuzu - Sayfa 3
Ölçüm Cihazları Anritsu Company VectorStar ME7848A-0140 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Anritsu Company VectorStar ME7848A-0140 17 sayfaları. Opto-electronic network analyzer systems
Ayrıca Anritsu Company VectorStar ME7848A-0140 için: Hızlı Başlangıç Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Opto-electronic Network Analyzer System
The ME7848A/E opto-electronic network analyzer (ONA) system comprises a VNA, a calibration O/E module,
and a laser/modulator converter assembly. Together, they allow calibrated RF response measurements of E/O,
O/E, and certain O/O devices. This document describes the system components, basic connection and operation
information, and some simple test steps to assure that the system is operating normally. Additional
measurement information is contained in the VectorStar
This document and all other documentation that supports the ME7848A/E is available on the Anritsu web site:
http://www.anritsu.com/
1.
Minimum Configurations
The following are the configurations for the -02xx opto-electronic network analyzer systems. The -01xx systems
differ in that they do not include the E/O converter and do not undergo system parameter test (although
individual elements are all fully tested and system specifications are expected to be met based on those
element tests). The -01xx systems do include the accessory kit described below.
The VNA may be equipped with other loop-enable options (-061 or -062) in lieu of option -051. Other VNA
options may also be added and none are excluded. Other O/E and E/O modules may be used with elements of
the system but the technical data sheet values do not apply.
Table 1.
ME7848A/E ONA System Configuration Options (1 of 3)
ME7848A ONA System
ME7848A-0210
110 GHz 1550 nm System
ME7848E-0210
110 GHz 1550 nm System
ME7848A/E QSG
®
Calibration and Measurement Guide – 10410-00318.
Configuration and Included Items
ME7838AX Broadband VectorStar VNA
MN4765B-0110 110 GHz 1550 Calibration Module
(with characterization files)
MN4775A-0110 110 GHz 1550 nm E/O Converter
2000-2119-R Accessory Kit which includes:
• 2 (13 cm) F-M W RF cables
• 1 one meter FC/PC-FC/APC fiber patch cord
• 1 F-F W adapter
• Optical connector cleaning accessories
(for both fiber ends and ferrule-based connectors)
ME7838EX Broadband VectorStar VNA
MN4765B-0110 110 GHz 1550 Calibration Module
(with characterization files)
MN4775A-0110 110 GHz 1550 nm E/O Converter
2000-2119-R Accessory Kit which includes:
• 2 (13 cm) F-M W RF cables
• 1 one meter FC/PC-FC/APC fiber patch cord
• 1 F-F W adapter
• Optical connector cleaning accessories
(for both fiber ends and ferrule-based connectors)
PN: 10410-00777 Rev. C
1. Minimum Configurations
QSG-3