DSC Impassa PT8 Talimat Sayfası

Güvenlik Sistemi DSC Impassa PT8 için çevrimiçi göz atın veya pdf Talimat Sayfası indirin. DSC Impassa PT8 2 sayfaları. Proximity tag

Sayfayı Yazdır

PT4/PT8 PROXIMITY TAG

INSTRUCTION SHEET

The PT4/PT8 proximity tag is installed on your

system by enrolling it on a WT5500P keypad. Use

your proximity tag to perform any keypad function

that would normally require a user access code.

The proximity tag is used in place of your access

code. To use your tag, place it close to the tag

reader icon (

) or to the left of the keypad LCD.

The battery in a proximity tag is not replaceable.

When its battery no longer works the proximity tag

must be replaced.

NOTE:There are no user serviceable com-

ponents used in this device.

Product Specifications

Operating Temperature: -10ºC to 55ºC

Humidity Range: 93% R.H., non-condensing

Weight: 10g

Dimensions (LxWxH): 43mm x 34mm x 10mm

Operating Frequency: 433.92MHz (PT4), 868MHz (PT8)

Battery: (1)CR2032,3V Lithium (Panasonic,Energizer)

Low Battery Level: 2.2V pre-determined

Enrolling Proximity Tags

1. Enter [

][5][Master Code] to enter User Code programming.

2. Scroll to the desired user code (01-16, or 40 for the Master Code) then press

[

3. Enter your desired 4 or 6-digit user access code. The following message will

be displayed after the user access code is entered:

Present Tag or

Press # to Exit

4. Place the proximity tag near the tag reader (

to assign it to the user code. The following message will be displayed:

Tag Enrolled

Successfully

If a proximity tag is assigned to an existing user code, the following message will

be displayed:

Duplicate

Tag/User Code

Return to Step 2 for instructions on how to enroll a user code.

NOTE:To exit the process at anytime, press [#].

Erasing a User Code/Proximity Tag

Enter [

][5][Master Code], select the desired user code. Enter [

code and associated proximity tag.

NOTE: User Code 40 for the Master Code cannot be deleted; an

attempt to delete this user code will delete the proximity tag only. The

user code must be re-enrolled before it can be used again.

Proximity Tag Operation

Place the proximity tag near the tag reader

arm/disarm your system.

When arming the system, the following message will be displayed:

Exit Delay in

Progress

When disarming the system, the following message will be displayed:

System Disarmed

If there is an attempt to swipe a proximity tag that has not been enrolled, an error

tone will sound and the following message will be displayed:

Invalid Tag

Return to Step1 for instructions on how to enroll the proximity tag.

WARNING: KEEP THE PROXIMITY TAG OUT OF REACH OF SMALL CHILDREN.

IMPORTANT - READ CAREFULLY: DSC Software purchased with or without

Products and Components is copyrighted and is purchased under the

following license terms:

• This End-User License Agreement ("EULA") is a legal agreement between You (the company,

individual or entity who acquired the Software and any related Hardware) and Digital Security

Controls, a division of Tyco Safety Products Canada Ltd. ("DSC"), the manufacturer of the inte-

grated security systems and the developer of the software and any related products or compo-

nents ("HARDWARE") which You acquired.

• If the DSC software product ("SOFTWARE PRODUCT" or "SOFTWARE") is intended to be

accompanied by HARDWARE, and is NOT accompanied by new HARDWARE, You may not use,

copy or install the SOFTWARE PRODUCT. The SOFTWARE PRODUCT includes computer soft-

ware, and may include associated media, printed materials, and "online" or electronic docu-

mentation.

• Any software provided along with the SOFTWARE PRODUCT that is associated with a separate

end-user license agreement is licensed to You under the terms of that license agreement.

• By installing, copying, downloading, storing, accessing or otherwise using the SOFTWARE

PRODUCT, You agree unconditionally to be bound by the terms of this EULA, even if this EULA

is deemed to be a modification of any previous arrangement or contract. If You do not agree to

the terms of this EULA, DSC is unwilling to license the SOFTWARE PRODUCT to You, and You

have no right to use it.

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as

other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

1. GRANT OF LICENSE This EULA grants You the following rights:

(a) Software Installation and Use - For each license You acquire, You may have only one copy of the

SOFTWARE PRODUCT installed.

) at the left side of the display

] to erase the

( )

at the left side of the display to

(b) Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run,

shared or used concurrently on or from different computers, including a workstation, terminal or

other digital electronic device ("Device"). In other words, if You have several workstations, You will

have to acquire a license for each workstation where the SOFTWARE will be used.

have one copy per license installed at any given time. You may use the back-up copy solely for

archival purposes. Except as expressly provided in this EULA, You may not otherwise make copies

of the SOFTWARE PRODUCT, including the printed materials accompanying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

(a) Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse

engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that

such activity is expressly permitted by applicable law notwithstanding this limitation. You may not

make any changes or modifications to the Software, without the written permission of an officer of

DSC. You may not remove any proprietary notices, marks or labels from the Software Product. You

shall institute reasonable measures to ensure compliance with the terms and conditions of this

EULA.

(b) Separation of Components - The SOFTWARE PRODUCT is licensed as a single product. Its

component parts may not be separated for use on more than one HARDWARE unit.

SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In this case,

the SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in this EULA..

(d) Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available

to others or post it on a server or web site.

(e) Software Product Transfer - You may transfer all of Your rights under this EULA only as part of a

permanent sale or transfer of the HARDWARE, provided You retain no copies, You transfer all of the

SOFTWARE PRODUCT (including all component parts, the media and printed materials, any upgrades

and this EULA), and provided the recipient agrees to the terms of this EULA. If the SOFTWARE

PRODUCT is an upgrade, any transfer must also include all prior versions of the SOFTWARE PRODUCT.

(f) Termination - Without prejudice to any other rights, DSC may terminate this EULA if You fail to

comply with the terms and conditions of this EULA. In such event, You must destroy all copies of the

SOFTWARE PRODUCT and all of its component parts.

(g) Trademarks - This EULA does not grant You any rights in connection with any trademarks or service

marks of DSC or its suppliers.

3. COPYRIGHT - All title and intellectual property rights in and to the SOFTWARE PRODUCT

(including but not limited to any images, photographs, and text incorporated into the SOFTWARE

PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PRODUCT, are

owned by DSC or its suppliers. You may not copy the printed materials accompanying the

SOFTWARE PRODUCT. All title and intellectual property rights in and to the content which may be

accessed through use of the SOFTWARE PRODUCT are the property of the respective content

owner and may be protected by applicable copyright or other intellectual property laws and

treaties. This EULA grants You no rights to use such content. All rights not expressly granted under

this EULA are reserved by DSC and its suppliers.

4. EXPORT RESTRICTIONS - You agree that You will not export or re-export the SOFTWARE

PRODUCT to any country, person, or entity subject to Canadian export restrictions.

5. CHOICE OF LAW - This Software License Agreement is governed by the laws of the Province of

Ontario, Canada.

6. ARBITRATION - All disputes arising in connection with this Agreement shall be determined

by final and binding arbitration in accordance with the Arbitration Act, and the parties agree to be

bound by the arbitrator's decision. The place of arbitration shall be Toronto, Canada, and the

language of the arbitration shall be English.

7. LIMITED WARRANTY

(a) NO WARRANTY - DSC PROVIDES THE SOFTWARE "AS IS" WITHOUT WARRANTY. DSC DOES NOT

WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT OPERATION OF

THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.

(b) CHANGES IN OPERATING ENVIRONMENT - DSC shall not be responsible for problems caused by

changes in the operating characteristics of the HARDWARE, or for problems in the interaction of the

SOFTWARE PRODUCT with non-DSC-SOFTWARE or HARDWARE PRODUCTS.

STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN THIS LICENSE

AGREEMENT, DSC'S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS LICENSE

AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU

TO LICENSE THE SOFTWARE PRODUCT AND FIVE CANADIAN DOLLARS (CAD$5.00).

BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY

NOT APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE WARRANTY AND

SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED

(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE) AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF

DSC. DSC MAKES NO OTHER WARRANTIES. DSC NEITHER ASSUMES NOR AUTHORIZES ANY

OTHER PERSON PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO CHANGE THIS

WARRANTY, NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY CONCERNING THIS

SOFTWARE PRODUCT.

(e) EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY - UNDER NO CIRCUMSTANCES SHALL

DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES

BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT

LIABILITY, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED

TO, LOSS OF PROFITS, LOSS OF THE SOFTWARE PRODUCT OR ANY ASSOCIATED EQUIPMENT,

COST OF CAPITAL, COST OF SUBSTITUTE OR REPLACEMENT EQUIPMENT, FACILITIES OR

SERVICES, DOWN TIME, PURCHASERS TIME, THE CLAIMS OF THIRD PARTIES, INCLUDING

CUSTOMERS, AND INJURY TO PROPERTY. WARNING: DSC recommends that the entire

system be completely tested on a regular basis. However, despite frequent testing, and

due to, but not limited to, criminal tampering or electrical disruption, it is possible for

this SOFTWARE PRODUCT to fail to perform as expected.

The proximity tag is provided with a unique serial number (hardcoded at the factory) consist-

ing of 8 hexadecimal digits. The total number of possible combiniations is 16.7 million. The

end-user can not change this number, only the enrolled serial numbers.

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security Controls

could void your authority to use this equipment.

This device complies with Part 15 Class B of the FCC rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference and (2) this device

must accept any interference received, including interference that may cause undesired op-

eration.

IC COMPLIANCE STATEMENT

IC:160A-PT4. The term IC before the radio certification number signifies that the Industry

Canada technical specifications were met. This Class B digital apparatus complies with Ca-

nadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003

du Canada.

The Model PT4 Wireless Proximity Tag has been certified by Telefication according to

EN50131-1:2006 + A1:2009, EN50131-3:2009, for Grade 2, Class II.

This device contains no user serviceable components. The device complies with EN50131-1

GRADE2 / CLASS II, EN50131-3, and EN50131-6 TYPE C.

The materials associated with this product (lithium batteries, etc.) must be recycled according to

local rules and regulations.

Hereby, DSC, declares that this device is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

The complete R&TTE Declaration of Conformity can be found at http://www.dsc.com/

listings_index.aspx.