DSC Maxsys PC6010 Kullanıcı Kılavuzu - Sayfa 8

Güvenlik Sistemi DSC Maxsys PC6010 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DSC Maxsys PC6010 20 sayfaları.

2.2 Turning All Your Areas ON ______________________________________________________

This procedure explains how to turn on all the areas that you have access to. Before you

turn areas on, you should check that they are not occupied, and that all zones are closed

(i.e. doors and windows are closed, there is no motion in the area).

12:00 2000/01/01

Step

Enter Your Code

Step

2. Keypad displays:

Do You Want To

Turn Areas On?

Step

3. Keypad displays:

Turn ON All

Your Areas?

4. The keypad beeps 3 times, the ON light turns on and the keypad displays:

Step

All Your Areas

Are Turning On

5. The keypad counts down the exit time (the number in the lower right-hand corner

Step

shows how much time is left). Leave the area through your entry/exit door. The area

will turn on after the exit time expires.

NOTE: Pressing

in, or to re-enter the area, you must enter your access code and turn the area off.

Attempt Failed

When you are trying to turn areas on, if you see the message

Attempt Failed

View Problems?

one or more zones may be open, or have problems. See section 2.4 for instructions.

Enter your access code.

To confirm, press

Please Leave

Now...

then,

will not prevent the area from being turned on. To remain

120