Ansell 22-136 Kullanıcı Kılavuzu - Sayfa 9
Güvenlik Ekipmanları Ansell 22-136 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ansell 22-136 10 sayfaları. Inteliforz charging tower for charging inteliforz pod charging tower
Sayfayı YazdırPOWER OFF State
The Charging Tower default state is POWER OFF. Under this state, the charging function for
the system is OFF.
POWER ON State
From the POWER OFF state, connect the AC Power Supply and Cable to the socket and then
push the Power button on Faceplate to power ON (LED is red when ON). Once power is ON,
the system can perform the following charging functions:
-
Insert Pod(s) into the Receptacle(s) to charge the Pod(s)
-
Connect Tablet to the specified DC Power Supply and then insert the DC Plug to the
socket under Tablet holder frame to continuously power / charge the Tablet battery.
From the POWER ON state, push the Power button on Faceplate to power off the system
(LED is off).
11. Troubleshooting
Problem
1.
Pod does not light up
when inserted into the
charger
12. Maintenance and cleaning
The product requires no maintenance.
13. Information security and data privacy
N/A
14. Warranty and Guarantee
The warranty of this product can be found in your Inteliforz agreement.
User Manual Inteliforz Charging Tower 1 Version 1.0 EN 2022
Possible cause
The pod isn't charging
Solution
Move pod to another
slot. If it charges in
another slot, the
receptacle could be
damaged. If it doesn't
charge, the Pod may be
damaged. Either way
contact Ansell customer
support.
Page 9/ 10