Ansell Trellchem Hands-Free Visor Light System Kullanım Talimatları - Sayfa 3

Güvenlik Sensörleri Ansell Trellchem Hands-Free Visor Light System için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. Ansell Trellchem Hands-Free Visor Light System 4 sayfaları.

Sayfayı Yazdır

How to install battery casing in suit

7. Insert the battery casing into the battery pack holder (see

picture above).

8. Without removing the release paper, place the battery pack

holder on the preferred position.

a) Standard position: Top right inside the hood, next to the

visor.

b) Alternative position: Beneath the visor on either left or

right side of the suit seam. This position requires an exten-

sion kit (optional).

Standard position

9. Make sure the on/off button on the battery casing is facing

downwards.

a) Pull the cable of the battery casing up/through the loop on

the right hand side of the battery pack holder (see picture

above).

b) Take a short cable loop. Pull the cable of the LED holder

down/through this loop (see picture above).

c) Connect the two cables.

10) Adjust the positioning of the battery pack holder and the

cable loop according to the picture above.

a) Make sure both battery pack holder and cable loop are po-

sitioned next to the inner visor tape, not on the tape!

b) Remove the release paper from the battery pack holder,

press to attach.

c) Remove the release paper from the cable loop, press to at-

tach.

Alternative position

If the battery casing is to be mounted on the alternative posi-

tion, place and attach the cable loops according to the draw-

ing below.

11. After attaching 1) LED holder, 2) battery casing and 3) cable

loop... Let all adhesive parts cure for at least 24 hours before

the suit is taken into use.

12. Verify functionality of the mounted light.

ATTENTION!

THE ADHESIVE STRIPS ON THE LED HOLDER ARE MADE

TO STICK PERMANENTLY AND CANNOT BE REMOVED

ONCE ATTACHED. TAKE CAUTION WHEN POSITIONING

THE LED HOLDER.

This product fulfils the requirements of the

EU Directive 2004/108/EC on electromagnetic

compatibility (EMC).

The Trellchem® Hands-Free Visor Light System

must be recycled according to EU and local

regulations for electronic waste and must not

be disposed of together with household or

other municipal waste.

TRELLCHEM® Hands-Free Visor Light System. US Patent Pending.

TRELLCHEM is a registered trademark owned by Trelleborg AB.