Daisy Under Bench Roller Kurulum Talimatları Kılavuzu - Sayfa 7

Dış Mekan Mobilyaları Daisy Under Bench Roller için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Daisy Under Bench Roller 12 sayfaları.

Sayfayı Yazdır

Install the tube motor onto the end frame,

secure firmly 4x mounting bolts.

Important: Make sure recess is facing DOWN when

mounting to frame to avoid water filling up inside.

Install the control housing, secure firmly the

4x mounting bolts.

Plug in the drive motor wire to the connector socket on the

underside of the control housing.

Note: Each connector socket has labels for the

correct appliance.

Clamp the panel to the drive motor end frame and plug into

'Solar' connector socket on the underside of the control

housing.

10.

Adjust the solar panel so it is facing the sun at midday (or

at the meantime your solar panel receives full sun). This will

ensure the optimum solar panel position for your location.

If your solar panel is not in direct sunlight for the majority of

the day, you will need to recharge the battery using the AC

charger. The regularity of recharging using the AC charger

will be determined by the amount of sun the PV panel

receives and your roller usage.

Note: If you do not have enough sunlight on the solar panel

to maintain battery voltage, consider the #1262 PV Post

Extension kit that comes with a 5m extension cord and post

to insert into the ground that the solar panel clamps to.

11.

Plug in AC Charger to fully charge battery before first

operation.

Ensure drive motor wire is running through the recess in the housing on the drive motor end, be careful not

pinch wire when mounting.

Install the tube motor onto end frame, secure firmly 4 x mounting bolts

Important: make sure recess is facing DOWN when mounting to frame to avoid water filling up inside

Install the control housing, secure firmly the 4 x mounting bolts

Plug in the drive motor wire to the connector socket on the underside of the control housing

Note: each connector socket has labels for the correct appliance

If you have a solar panel, clamp the panel to the dr

the underside of the control housing

10.

Adjust the solar panel so it is facing the sun at mi

This will ensure the optimum solar panel position for

If your solar panel is not in direct sunlight for the maj

AC charger. The regularity of recharging using AC cha

receives and your roller usage

Note: If you do not have enough sunlight on the sola

Extension kit that comes with a 5m extension cord an