DSC PC2580 Kullanım Kılavuzu - Sayfa 4

Güvenlik Sistemi DSC PC2580 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DSC PC2580 13 sayfaları.

NOTES

Programming Access Codes with the LCD600 Keypad

With the system disarmed, press the [

Press [5] to program Access Codes.

Enter the Master Code when this message is displayed.

This message will be displayed to indicate that Access Code 1, the Master

Code, is programmed. When scrolling through the list of Access Codes, a

"P" will be displayed in the lower right corner of the screen to indicate that

an Access Code is programmed.

Use the [<] and [>] Keys to scroll to the Access Code to be programmed.

When the desired code is displayed, or if you know the number of the code

you wish to program, enter a number from [1] to [8] to select the code. To

program Access Codes 9 through 16, press [9]. After pressing [9], use the

[<] and [>] Keys to scroll to the desired Access Code, and enter a number

from [1] to [8] to select a code from [9] to [16].

When this message is displayed, enter the new Access Code. Use only the

numbers from [0] to [9]; do not press [

completely erase a code, enter [

Code (Access Code 1)!

When the Access Code is programmed, a message similar to the one shown

here will be displayed. In this example, the message indicates that Access

Code 3 has been programmed. If [

"P" will not be displayed.

When you are finished programming codes, press the [#] Key to return to the

"Ready" mode.

Turning the Door Chime Feature ON and OFF with the LCD600 Keypad

With the system disarmed, press the [

Use the [<] and [>] Keys to scroll to this message. Press [6], then enter the

Master Code.

Use the [<] and [>] Keys to scroll to this message. Press [6] to turn the Door

Chime feature ON and OFF. If the Door Chime is being turned ON, the

keypad will sound several quick beeps. If the Door Chime is being turned

OFF, the keypad will sound a single long tone.

When finished setting the Door Chime feature, press the [#] Key to return to

the "Ready" mode.

∗

] Key and scroll to this message.

∗

] or [#] when entering the code. To

∗∗∗∗

]. Do not try to erase the Master

∗∗∗∗

] is entered to erase a code, the

∗

] Key.