DSC PC3000 Kullanım Kılavuzu - Sayfa 2
Güvenlik Sistemi DSC PC3000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DSC PC3000 15 sayfaları.
Ayrıca DSC PC3000 için: Kullanım Kılavuzu (15 sayfalar)
Sayfayı Yazdır
A Word About Your System
The PC3000 Security System has been designed to give you the greatest possible
flexibility and convenience. Read this manual carefully and become familiar with
the operation of your Security System. Your installer will tell you which commands
listed in this manual apply to your system. Fill out the System Reference sheet in this
manual and store it in a safe place for future reference. The label provided for the
inside of the keypad door can be used to record which sensors are on each zone.
Important Note
Remember that no security system can prevent emergencies. It is only intended to
alert you in case of an emergency and should not take the place of prudent security
practices or life and property insurance.
It is important to test your system every week. To do this, first inform the monitoring
station that you are testing your system. Then, with the system disarmed, activate
all detection sensors one at a time and observe the zone light come on at the keypad
as each sensor is activated. Perform a bell test by entering [
Code],[8] with the system disarmed. The PC3000 can be programmed at the time
of installation to automatically perform a test transmission to the monitoring station
on a regular basis. If the system has not been programmed for this automatic test,
call the monitoring station for instructions on how to perform a test transmission.
Don't forget to inform the monitoring station when you have finished your test.
Check to see if the "Trouble" light is on when arming the system. See the Trouble
Display section in this manual for a description of the different trouble conditions.
Contact your installer for assistance if the trouble condition cannot be located and
corrected.
How Your System Works
Your PC3000 Security System is made up of a control panel, one or more PC3000RK
keypads, and various detectors and sensors. The control panel will be mounted out
of the way in a utility room or basement. The metal cabinet contains the system
electronics, fuses and stand-by battery. There is normally no reason for anyone but
the installer to have access to the control panel. The keypad(s) have an audible
indicator, display lights and command entry keys. The keypad is used to send
commands to the system and to display the current system status. Keypads are
mounted in convenient areas close to the exit-entry doors. The security system has
up to eight zones or areas of protection. Each zone used will have connected to it
various sensors, such as door or window contacts, motion detectors, glassbreak
detectors and vibration or shock sensors. When a sensor is in alarm, a keypad light
will be on to indicate which zone is in alarm.
*
],[6],[Master