DAITEM SH601AU Kurulum Kılavuzu - Sayfa 15

Güvenlik Sistemi DAITEM SH601AU için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DAITEM SH601AU 20 sayfaları. Alarm pendant

3. Test radio coverage:

The procedure described below must be followed to test radio coverage:

Pull down on the sliding part of the pendant in each place occupied by the user (each room, garage, cellar, loft,

garden, etc.) in order to check that the radio link with the control panel (or dialler) works. You will need to

do this with the help of a second person.

If necessary, and in order to increase radio coverage, it is possible to:

A. adjust the position of the control panel (or dialler),

B. use the alarm control panel via the system's radio relay (see "Advanced programming/Programming a

pendant relayed to the control panel").

4. Switch the control panel (or dialler) back to normal user mode:

master code

REMINDER: during normal operation, make sure the pendant's sliding part is closed to prevent premature battery

wear.

"beep, off"