ANSI ROPE TERMINATION ANCHOR Kullanıcı Talimat Kılavuzu - Sayfa 2

Güvenlik Ekipmanları ANSI ROPE TERMINATION ANCHOR için çevrimiçi göz atın veya pdf Kullanıcı Talimat Kılavuzu indirin. ANSI ROPE TERMINATION ANCHOR 8 sayfaları.

Sayfayı Yazdır

Please read and understand the manufacturer's instructions for each component or part of the complete system.

Manufacturer's instructions must be followed for proper use, care, and maintenance of this product. These instructions

must be retained and be kept available for the worker's reference at all times. Alterations or misuse of this product, or

failure to follow instructions, may result in serious injury or death.

Note: The user is advised to keep this user instructions document for the life of the product.

Manufacturer

Certication Body

Ongoing Assessment Body

INTRODUCTION: Thank you for purchasing TheHarnessDepot Fall Protection Rope Termination Anchor. This manual must be read and

understood in its entirety, and used as part of an employee training program as required by OSHA or any applicable state agency.

This and any other included instructions must be made available to the user of the equipment. The user must understand how to safely

and effectively use the

APPLICABLE SAFETY STANDARDS: When used according to instruction specications, this product meets or exceeds all applicable

OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.1-2007, ANSI A10.32-2012 and VG11 Sheet 114 standards for fall protection.

Applicable standards and regulations depend on the type of work being done, and also might include state-specic regulations. Consult

regulatory agencies for more information on personal fall arrest systems and associated components.

WORKER CLASSIFICATIONS:

Qualied Person: A person with an accredited degree or certication and with extensive experience or sufcient professional standing,

who is considered procient in planning and reviewing the conformity of fall protection and rescue systems.

Competent Person: A highly trained and experienced person who is ASSIGNED BY THE EMPLOYER to be responsible for all elements of

a fall safety program, including, but not limited to, its regulation, management, and application. A person who is procient in identifying

existing and predictable fall hazards, and who has the authority to stop work in order to eliminate hazards.

Authorized Person: A person who is assigned by their employer to work around or be subjected to potential or existing fall hazards It is

the responsibility of a Qualied or Competent person to supervise the job site and ensure all applicable safety regulations are complied

with Components and Specications.

IMPORTANT BEFORE INSTALLATION AND USE Prior to use, plan your system-

Ensure all PFAS equipment is selected and deemed compatible by a Competent Person.

Eliminate or minimize all risk of swing fall.

Determine desired location for

materials.

Installation, set-up, and use of

INSTALLATION OF RIGGING PLATE:

in two different manners.

Compatible rope may be threaded through 1st hole to 5th hole. The 6th hole then functions as an anchorage connector.

Eagle Industrial Tool Inc.

304 County Park Road Avella. Pa 15312

SATRA Technology Europe Ltd, Bracetown Business Park, Clonee,

Dublin D15 YN2P Ireland (Notied Body 2777)

SGS Fimko Oy, Takomotie 8, FI-00380 Helsinki, Finland

(Notied Body 0598)

Rope Termination Anchor

and all fall safety equipment used in combination with the Rigging Plate.

Rope Termination Anchor

; ensure location is free of debris, rot, decay, cracking, and hazardous

system must be done under the supervision of a Qualied Person.

may be connected to a compatible vertical lifeline (VLL) or rope lanyard