DSC PowerSeries PC1616 Kurulum Kılavuzu - Sayfa 11
Güvenlik Sistemi DSC PowerSeries PC1616 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DSC PowerSeries PC1616 20 sayfaları. System
enhancement
module
Ayrıca DSC PowerSeries PC1616 için: Kurulum Kılavuzu (17 sayfalar), Kurulum Kılavuzu (13 sayfalar), Hızlı Kılavuz (4 sayfalar), Manuel (18 sayfalar)
Sayfayı Yazdır
Using the Dealer Website
1.
Move all Z-Wave devices to their final location on the property.
2.
Navigate to the Equipment page on the Dealer Website.
3.
Click the emPower Devices tab.
4.
Open the Advanced Z-Wave Commands menu below
the Equipment List.
5.
Click Add Z-Wave Devices.
Wait for the bolded message: Checking for new devices
6.
on the network.
7.
Trigger a device to add it to the network.
8.
When a device is added successfully, it will show up
on this screen following a 30 second delay.
9.
Continue triggering devices. You may add several devices
to the network without re-entering Add Mode.
Using the SEM
1.
Press and hold Z-Wave button on the Alarm.com module.
2.
Release the button once LED L2 flashes in groups of four.
3.
Trigger a device to add it to the network.
4.
When a device is added successfully, L2 will illuminate solid.
5.
You will need to re-enter Add Mode before triggering the
next device.
If you can't add a device to the network, you may need to
TIP:
delete the device's current network data using the device
deletion process before you can add it to the new network
(some devices come from the factory with network data).
11