DSC PowerSeries PC1864 Kurulum Kılavuzu - Sayfa 10

Güvenlik Sistemi DSC PowerSeries PC1864 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DSC PowerSeries PC1864 20 sayfaları. System enhancement module
Ayrıca DSC PowerSeries PC1864 için: Kurulum Kılavuzu (17 sayfalar), Kurulum Kılavuzu (13 sayfalar), Manuel (18 sayfalar)

Sayfayı Yazdır

ADD & DELETE Z-WAVE DEVICES

Please visit the Dealer Website Support Resources for a complete

explanation of Z-Wave communication, Z-Wave signal strength,

and additional installation resources.

Alarm.com will not recognize any Z-Wave devices previously learned into

the panel. These devices will need to be deleted from the previous Z-Wave

network and added to the SEM for the customer to use Alarm.com's home

automation services (e.g. automation control via customer website, app,

and intelligent automation rules).

If the customer is on a different interactive platform,

TIP:

we recommend having them log in to that site and taking

screenshots of notifications, rules, and home automation

device names for reference later.

For optimal Z-Wave signal strength, make sure the orange Z-Wave

antenna is pointed down toward the tabs at the base of the SEM.

ADDING Z-WAVE DEVICES

Using the Dealer Website or MobileTech is strongly recommended.

Using MobileTech

Move all Z-Wave devices to their final location on the property.

Open MobileTech and select the customer.

Navigate to the Equipment List screen.

Select emPower Management.

Select Add Z-Wave Devices.

Wait for the bolded message: Checking for new devices on

the network.

Trigger a device to add it to the network.

When a device is added successfully, it will show up on

this screen following a 30 second delay.

Continue triggering devices. You may add several devices

to the network without re-entering Add Mode.

Z-Wave

Button

Z-Wave

Antenna