ANSITE AST-2008D2 Kullanıcı Kılavuzu - Sayfa 9

Güvenlik Sistemi ANSITE AST-2008D2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ANSITE AST-2008D2 10 sayfaları.

Fig.10 the 8 bit address code in the middle row all in float state"0", the zone code is

"2121"(zone 2).

Fig.11 the 8 bit address code in the middle row all in float state"0", the zone code is

"2112"(zone 3)

Fig.12 the 8 bit address code in the middle row all in float state"0", the zone code is

"2111"(zone 4)

Fig.13 the 8 bit address code in the middle row all in float state"0", the zone code is set as

"2212",

that is 24 hours guard zone, or emergency zone, used for wireless emergency button or for

smoke detectors, gas leakage detectors.

Fig.14 the 8 bit address code in the middle row is set as"21120102",the zone code is

"2211"(zone 1)

Fig.15 the 8 bit address code in the middle row is set as"11100222",the zone code is

"2121"(zone 2)

Fig.16 the 8 bit address code in the middle row is set as"12202011",the zone code is

"2112"(zone 3)

Fig.17 the 8 bit address code in the middle row is set as"22212011",the zone code is

"2112"(zone 3)

Fig.18 the 8 bit address code in the middle row is set as"11011220",the zone code is

"2111"(zone 4)

Zone five

s code is 1221, Zone six

If you want to add detector to your alarm set, there will be two method , the first method is you

configure the detectors according to the short jumper slip setting way same as the detector in your

standard kit, the second method is you consult the 8 bit address code from the "Product No" on the

bottom of your alarm set, and encode 4 bit zone code following the above schematic diagram as

you need.

Fig.19 illustration diagram fo R F emitting module

The wireless smoke detector and gas leakage detectors each has an wireless emitting module

inside the plastic cover. There are also 36 pins to set the 8 bit address code and 4 bit zone code on

the emitting module.

The 8 bit address code is on the bottom side, and the 4 bit zone code is on the right side, the 8 bit

s code is 1212