FoxESS LV5200 Kullanıcı Kılavuzu - Sayfa 11

Pil Paketi FoxESS LV5200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. FoxESS LV5200 16 sayfaları.
Ayrıca FoxESS LV5200 için: Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

1. Installation
2. Installation Steps
3. System Start up
4. Commissioning
5. Troubleshooting
6. Troubleshooting and Maintenance

6.4 Installation Steps

· Mounting

STEP-1

Measure and confirm that the bottom of the bracket is 285mm away from the ground, and mark the 5-hole

positions on the bracket with a pen.

STEP-2

Drill holes with electric drill, make sure the holes are deep enough (at least 50mm) for installation, and then

tighten the expansion tubes.

STEP-3

Install the expansion tubes in the holes, and tighten them. Then install the wall bracket by using the expansion

screws.

STEP-4

Hang the battery over the bracket, move the battery close to it, lower the battery, and make sure the 2 mounting

bars on the back are fixed well with the 2 grooves on the bracket.

· Wiring