DSC tyco WP8360 Kullanıcı Kılavuzu - Sayfa 10
Güvenlik Sistemi DSC tyco WP8360 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DSC tyco WP8360 19 sayfaları.
Sayfayı Yazdır
independently controllable areas with different users assigned to each partition whereby each user
can arm the partition to which they are assigned.
Each user code can be assigned to a combination of up to three partitions, and each partition can
be armed or disarmed regardless of the status of the other partitions within the system. Example:
you can define the garage as partition 1, the basement as partition 2, and the house as partition 3.
Because each partition is independent of other partitions, you can arm or disarm each partition as
required, without altering the states of the other partitions.
Partitions status is indicated as P1:X P2:X P3:X, where each X value indicates a different partition
state as described in the following table:
Table 5: Partition status
R
Ready
N
Not ready
A
Away
H
Home
E
Exit delay
D
Entry delay
-
Not used
Note: Remote operation is performed per partition, or per user code defined for a particular
partition, when partitioning is enabled.
A partition is alarmed when receiving an event from an alarmed device assigned to that partition.
Alarmed devices do not affect partitions to which they are not assigned. A siren is common to all
partitions; therefore, an alarm from one or more partitions will activate the siren.
Siren activity in partitions
The following list describes the features of siren activity in partitions:
•
For a siren that is common to all partitions, an alarm from one or more partitions will activate
the siren.
•
If the Siren per partition feature is disabled by the installer, all sirens will be activated if there
is an alarm in any partition.
•
If the Siren per partition feature is enabled by the installer, a siren will be activated if there is
an alarm only in its associated partition or partitions.
•
A siren activates exit/entry beeps during exit/entry delay of its associated partition or
partitions.
•
Overlapping siren activations from different partitions will not cause the duration of the siren
to be extended.
•
If the Siren per partition feature is disabled by the installer, a siren alarm in a particular
partition can be stopped only if the user that disarms the system has permissions to the
partition in question.
•
A siren that is assigned to common partitions can be disarmed by any user who has
permissions to that common partition.
10
WP8360 V20.2 User Guide