Anslut 004545 Kullanım Talimatları Kılavuzu - Sayfa 14
Aydınlatma Ekipmanları Anslut 004545 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Anslut 004545 16 sayfaları. Solar cell lighting
EN
TECHNICAL DATA
Battery
Luminous flux
USE
NOTE:
Before the solar cell lamp can shine at full capacity the solar
panel must have charged the battery in direct sunlight for 48
hours.
1.
Twist the solar panel to release it from the chimney.
2.
Pull off the plastic tab between the battery and the contact
plate.
3.
Replace the solar panel on the chimney.
4.
Place the solar lamp so that it is exposed to the sun for at
least 48 hours to charge the battery.
Positioning
•
The position, weather conditions and season affect the
length of time that the batteries can power the lamp. If the
solar panel has been in sunlight for 8 hours, the solar lamp
will shine for up to 6 hours.
14
Recycle discarded product as electrical waste.
1,2 V 40 mAh Ni-MH
1 lm