FOXFURY 420-L06 Ürün Kılavuzu - Sayfa 5

El feneri FOXFURY 420-L06 için çevrimiçi göz atın veya pdf Ürün Kılavuzu indirin. FOXFURY 420-L06 7 sayfaları. Command series

Sayfayı Yazdır
INSTALLING THE ELASTIC STRAP | 5 MINS (APPROX)
(WATCH THE VIDEO: FOXFURY .COM/VIDEOS)
1
2
FoxFury logo
on strap should
face inward for
STEP 1
4
Place the headlamp on a flat surface. Position the Light Head so the Power/
Mode Switch is on the left and the LEDs face forward. NOTE: Make sure the
FoxFury logo on the Battery Pack is correctly oriented before beginning.
1.
1
Begin with the end of the strap that does not have the Buckle attached.
With the FoxFury logo side of the strap facing right, feed the strap through
the left Buckle Slot of the Light Head.
2.
Run the free side of the strap back through the Buckle. NOTE: The
2
FoxFury logo on the strap will now be facing to the left.
3
3.
Run the remaining bit of strap through the left Buckle Slot on the Battery
Pack (on the cable side). Then continue through the Buckle Slot on the
right side of the Battery Pack.
4.
4
Continue to run the strap through the Buckle Slot on the right side of the
Light Head. Firmly press the velcro together to finish installing the Strap.
Adjust the Battery Pack position and strap length at the Buckle for the
desired fit.
8
3
INSTALLING THE SILICONE STRAP | 5 MINS (APPROX)
(WATCH THE VIDEO: FOXFURY .COM/VIDEOS)
1
2
4
Place the headlamp on a flat surface. Position the Light Head so the Power/
Mode Switch is on the left and the LEDs face forward. NOTE: Make sure the
FoxFury logo on the Battery Pack is correctly oriented before beginning.
1
1.
The Silicone Strap comes with two (2) buckles. Attach the first buckle
onto one end of the strap (about six (6) inches from the end). Then, take
that end of the strap and run it through (from the inside) the Buckle Slot
on the left of the Light Head.
2.
2
Once the strap is through the left Buckle Slot of the Light Head, feed the
strap back through the Buckle.
3.
Run the opposite end of the strap through the left Buckle Slot on the
3
Battery Pack (on the cable side). Then continue through the Buckle Slot
on the right side of the Battery Pack.
4
4.
Repeat Steps 1-2 for the right side of the strap. Adjust the Battery Pack
position and strap length at the Buckle for the desired fit.
3
9