DSC HS2ICONPX Kurulum Talimatları Kılavuzu - Sayfa 10

Tuş takımı DSC HS2ICONPX için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. DSC HS2ICONPX 11 sayfaları.

Sayfayı Yazdır

DSC HS2ICONPX Kurulum Talimatları Kılavuzu

Limited Warranty

Digital Security Controls (DSC) warrants that for a period of 12 months from the date of purchase, the

product shall be free of defects in materials and workmanship under normal use and that in fulfillment of

any breach of such warranty, DSC shall, at its option, repair or replace the defective equipment upon

return of the equipment to its repair depot. This warranty applies only to defects in parts and workmanship

and not to damage incurred in shipping or handling, or damage due to causes beyond the control of Digital

Security Controls such as lightning, excessive voltage, mechanical shock, water damage, or damage

arising out of abuse, alteration or improper application of the equipment. The foregoing warranty shall

apply only to the original buyer, and is and shall be in lieu of any and all other warranties, whether

expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls.

Digital Security Controls neither assumes responsibility for, nor authorizes any other person purporting to

act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability

concerning this product. In no event shall Digital Security Controls be liable for any direct, indirect or con-

sequential damages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in

connection with the purchase, installation or operation or failure of this product. Warning: Digital Security

Controls recommends that the entire system be completely tested on a regular basis. However, despite

frequent testing, and due to, but not limited to, criminal tampering or electrical disruption, it is possible for

this product to fail to perform as expected. Important Information: Changes/modifications not expressly

approved by DSC could void the user's authority to operate this equipment. IMPORTANT - READ

CAREFULLY: DSC Software purchased with or without Products and Components is copyrighted and

is purchased under the following license terms: This End-User License Agreement ("EULA") is a legal

agreement between You (the company, individual or entity who acquired the Software and any related

Hardware) and Digital Security Controls, a division of Tyco Safety Products Canada Ltd. ("DSC"), the

manufacturer of the integrated security systems and the developer of the software and any related

products or components ("HARDWARE") which You acquired.

If the DSC software product ("SOFTWARE PRODUCT" or "SOFTWARE") is intended to be accom-

panied by HARDWARE, and is NOT accompanied by new HARDWARE, You may not use, copy or

install the SOFTWARE PRODUCT. The SOFTWARE PRODUCT includes computer software,

and may include associated media, printed materials, and "online" or electronic documentation.

Any software provided along with the Software Product that is associated with a separate end-user

license agreement is licensed to You under the terms of that license agreement.

By installing, copying, downloading, storing, accessing or otherwise using the Software Product, You

agree unconditionally to be bound by the terms of this EULA, even if this EULA is deemed to be a modi-

fication of any previous arrangement or contract. If You do not agree to the terms of this EULA, DSC is

unwilling to license the Software Product to You, and You have no right to use it.

SOFTWARE PRODUCT LICENSE

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as

well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not

sold.

1. GRANT OF LICENSE This EULA grants You the following rights:

(a) Software Installation and Use - For each license You acquire, You may have only one copy of the

SOFTWARE PRODUCT installed.

(b) Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed,

run, shared or used concurrently on or from different computers, including a workstation, terminal or other

digital electronic device ("Device"). In other words, if You have several workstations, You will have to

acquire a license for each workstation where the SOFTWARE will be used.

have one copy per license installed at any given time. You may use the back-up copy solely for archival

purposes. Except as expressly provided in this EULA, You may not otherwise make copies of the

SOFTWARE PRODUCT, including the printed materials accompanying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

(a) Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse engin-

eer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such

activity is expressly permitted by applicable law notwithstanding this limitation. You may not make any

changes or modifications to the Software, without the written permission of an officer of DSC. You may

not remove any proprietary notices, marks or labels from the Software Product. You shall institute reas-

onable measures to ensure compliance with the terms and conditions of this EULA.

(b) Separation of Components - The Software Product is licensed as a single product. Its component

parts may not be separated for use on more than one HARDWARE unit.

the SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In this

case, the SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in this

EULA.

(d) Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it avail-

able to others or post it on a server or web site.

(e) Software Product Transfer - You may transfer all of Your rights under this EULA only as part of a per-

manent sale or transfer of the HARDWARE, provided You retain no copies, You transfer all of the

SOFTWARE PRODUCT (including all component parts, the media and printed materials, any

upgrades and this EULA), and provided the recipient agrees to the terms of this EULA. If the

SOFTWARE PRODUCT is an upgrade, any transfer must also include all prior versions of the

SOFTWARE PRODUCT.

(f) Termination - Without prejudice to any other rights, DSC may terminate this EULA if You fail to com-

ply with the terms and conditions of this EULA. In such event, You must destroy all copies of the

SOFTWARE PRODUCT and all of its component parts.

(g) Trademarks - This EULA does not grant You any rights in connection with any trademarks or service

marks of DSC or its suppliers.

3. COPYRIGHT - All title and intellectual property rights in and to the SOFTWARE PRODUCT

(including but not limited to any images, photographs, and text incorporated into the SOFTWARE

PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PRODUCT,

are owned by DSC or its suppliers. You may not copy the printed materials accompanying the

SOFTWARE PRODUCT. All title and intellectual property rights in and to the content which may be

accessed through use of the SOFTWARE PRODUCT are the property of the respective content owner

and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA

grants You no rights to use such content. All rights not expressly granted under this EULA are reserved by

DSC and its suppliers.

4. EXPORT RESTRICTIONS - You agree that You will not export or re-export the SOFTWARE

PRODUCT to any country, person, or entity subject to Canadian export restrictions.

5. CHOICE OF LAW - This Software License Agreement is governed by the laws of the Province of

Ontario, Canada.

6. ARBITRATION - All disputes arising in connection with this Agreement shall be determined by final

and binding arbitration in accordance with the Arbitration Act, and the parties agree to be bound by the arbit-

rator's decision. The place of arbitration shall be Toronto, Canada, and the language of the arbitration shall

be English.

7. LIMITED WARRANTY

(a) NO WARRANTY - DSC PROVIDES THE SOFTWARE "AS IS" WITHOUT WARRANTY.

DSC DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR

REQUIREMENTS OR THAT OPERATION OF THE SOFTWARE WILL BE

UNINTERRUPTED OR ERROR-FREE.

(b) CHANGES IN OPERATING ENVIRONMENT - DSC shall not be responsible for problems

caused by changes in the operating characteristics of the HARDWARE, or for problems in the interaction

of the SOFTWARE PRODUCT with non-DSC-SOFTWARE or HARDWARE PRODUCTS.

EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN

THIS LICENSE AGREEMENT, DSC'S ENTIRE LIABILITY UNDER ANY PROVISION OF

THIS LICENSE AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE AMOUNT

ACTUALLY PAID BY YOU TO LICENSE THE SOFTWARE PRODUCT AND FIVE

CANADIAN DOLLARS (CAD$5.00). BECAUSE SOME JURISDICTIONS DO NOT ALLOW

THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE

WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES,

WHETHER EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND OF ALL OTHER

OBLIGATIONS OR LIABILITIES ON THE PART OF DSC. DSC MAKES NO OTHER

WARRANTIES. DSC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON

PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO CHANGE THIS WARRANTY,

NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY CONCERNING THIS

SOFTWARE PRODUCT.

(e) EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY - UNDER NO

CIRCUMSTANCES SHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL,

CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON BREACH OF WARRANTY,

BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER LEGAL

THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS,

LOSS OF THE SOFTWARE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF

CAPITAL, COST OF SUBSTITUTE OR REPLACEMENT EQUIPMENT, FACILITIES OR

SERVICES, DOWN TIME, PURCHASERS TIME, THE CLAIMS OF THIRD PARTIES,

INCLUDING CUSTOMERS, AND INJURY TO PROPERTY.

WARNING: DSC recommends that the entire system be completely tested on a regular basis.

However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical dis-

ruption, it is possible for this SOFTWARE PRODUCT to fail to perform as expected.

FCC Compliance Statement

CAUTION: Changes or modifications not expressly approved by DSC could void your authority to use

this equipment. This equipment generates and uses radio frequency energy and if not installed and used

properly, in strict accordance with the manufacturer's instructions, may cause interference to radio and

television reception. It has been type tested and found to comply with the limits for Class B device in

accordance with the specifications in Subpart "B" of Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference in any residential installation. However, there is no guar-

antee that interference will not occur in a particular installation. If this equipment does cause interference

to television or radio reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures: Re-orient the receiv-

ing antenna; Relocate the alarm control with respect to the receiver; Move the alarm control away from

the receiver; Connect the alarm control into a different outlet so that alarm control and receiver are on dif-

ferent circuits. If necessary, the user should consult the dealer or an experienced radio/television tech-

nician for additional suggestions. The user may find the following booklet prepared by the FCC helpful:

"How to Identify and Resolve Radio/Television Interference Problems". This booklet is available from

the U.S. Government Printing Office, Washington, D.C. 20402, Stock #004-000-00345-4.

Models: HS2LCDRF9, HS2LCDRFP9, HS2ICNRF9, HS2ICNRFP9 (operating in 912- 919MHz

band) are compliant with applicable FCC Part 15.247 and IC RSS-210 rules. WARNING! To comply

with FCC and IC RF exposure compliance requirements, the HS2LC-DRF (P)9 or HS2ICNRF(P)9

keypads should be located at a distance of at least 20 cm from all persons during normal operation. The

antennas used for this product must not be co-located or operated in conjunction with any other antenna or

transmitter. This device complies with FCC Rules Part 15 and with Industry Canada license-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference that may be received or that may

cause undesired operation. IC:160A - HS2KRFP9. The term "IC" before the radio certification number

only signifies that Industry Canada technical specifications were met. Le present appareil est conforme

aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autor-

isee aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de

l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en

compromettre le fonctionnement. Operating Instructions shall be made available to the user.

The Model HS2LED, HS2LCD (P), HS2ICN (P), HS2LCDRF(P) 8, HS2ICNRF (P)8 Keypads have

been certified by Telefication according to EN50131-1:2006 + A1:2009, EN50131- 3:2009 for Grade 2,

Class II. EN50131-1 Grade2/Class II. This Installation Sheet applies to the following models: HS2LED,

HS2ICN, HS2ICNP, HS2ICNRFx, HS2ICNRFPx, HS2LCD, HS2LCDP, HS2LCDRFx and

HS2LCDRFPx; x = 9 wherethe system operates in 912-919MHz, 8 where the system operates in

868MHz band, and 4 where the system operates in 433MHz band.

Tech Support: 1-800-387-3630 (Canada, US), 905-760-3000