Anslut 002-036 Kullanım Talimatları Kılavuzu - Sayfa 7
Taşkın Işık Anslut 002-036 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Anslut 002-036 7 sayfaları.
Sayfayı Yazdır
SAFETY INSTRUCTIONS
•
The product must be connected to an
earthed power point.
•
A damaged cord or plug must be replaced
by an authorised service centre or
qualified person to ensure safe use.
•
Regularly check all electrical connections
and power cords for damage. Rectify any
faults before using the product. Always
have the wiring and connections checked
by an authorised electrician.
•
Check that the mains voltage corresponds
to the rated voltage on the type plate.
Always use a fuse that has the correct
amperage rating.
•
Do not use this product in explosive
environments, e.g. near flammable
liquids, gases or dust. Do not use the
product near flammable materials.
•
Do not look into the light source.
not use the product if the glass front is
cracked or damaged.
•
Discard the product if the protective glass
is cracked or damaged.
•
The light source is not replaceable. If it
stops working, the entire lamp must be
replaced.
•
The minimum distance between the
floodlight and an illuminated object is
1 metre.
WARNING!
The floodlight gets very hot when in use.
– risk of burn injuries. Keep flammable
materials away from the floodlight. Make
sure there is enough ventilation to prevent
the floodlight getting too hot.
TECHNICAL DATA
Rated voltage
Output
Safety class
Protection rating
Luminous flux
Dimensions, without mount 108x84x30 mm
Weight
DESCRIPTION
Dimensions
1.
108 mm
2.
110 mm
3.
52 mm
4.
5.5 mm
5.
5.5 mm
Do
6.
50 mm
7.
60 mm
FIG. 1
FIG. 2
MOUNTING
1.
Mark out on the wall where the floodlight
mount is to be fitted.
2.
Drill holes for the floodlight mount.
3.
Insert plugs if necessary, and screw on the
floodlight mount with suitable screws.
4.
Plug the plug into the power point.
EN
230 V ~ 50 Hz
10 W
I
IP65
750 lm
0.33 kg
7