Foxfury Lighting Solutions RUGO Hızlı Başlangıç Kılavuzu - Sayfa 2
Çalışma Işığı Foxfury Lighting Solutions RUGO için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Foxfury Lighting Solutions RUGO 2 sayfaları. Can be mounted to an action cam, dslr camera, most tripods or to the puck adaptor (purchased separately)
Sayfayı YazdırUSING THE TRI-LENS
™
FLOOD
120°
BEAM DISTANCE: 10ft (3m)
USED FOR: Close-up
AREA
55°
BEAM DISTANCE: 30ft (10m)
USED FOR: Mid-range
SPOT
18°
BEAM DISTANCE: 100ft (30m)
USED FOR: Distance
REMOVING/CHANGING THE
STANDARD MOUNT
1
Start with the Rugo
positioned so that the
™
Thumbscrews are on top.
2
Twist each Thumbscrew counter-clockwise
until they become loose. They should then
be ready to pull out completely .
3
REMOVING/CHANGING THE
¼"-20 & COLD-SHOE MOUNT
1
Start with the Rugo
positioned so that the
™
Thumbscrews are on top.
2
Twist each Thumbscrew counter-clockwise
until they become loose. They should then
be ready to pull out completely .
3
MOUNTING TO DEVICES
NOTE: Orientation of Mount Knobs
should match as shown above.
ACTION CAM
The Rugo
can be mounted to an Action
™
Cam via the removable Standard Mount.
Line up the mounts on the Rugo
with
™
the mounts on the Action Cam and then
tighten the Mount Knobs.
CAMERA
The Rugo
can be mounted to a DSLR
™
camera via the removable Cold-shoe
Mount. Simply slide the mount onto the
camera flash attachment and twist the
Locking Ring until securely fastened.
TRIPOD OR PUCK ADAPTOR
The Rugo
can be mounted to most
™
tripods or to the Puck Adaptor
(purchased separately) via the ¼"-20
Mount. Twist the threaded hole of the
Rugo
¼"-20 Mount onto the screw of
™
the tripod or Puck. Then, twist the Rugo
and Puck until it is securely fastened.
™