Foxfury Lighting Solutions RUGO 700-301 Hızlı Başlangıç Kılavuzu

Çalışma Işığı Foxfury Lighting Solutions RUGO 700-301 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Foxfury Lighting Solutions RUGO 700-301 2 sayfaları.

Sayfayı Yazdır
RUGO
™
700-300S | 700-301 | 700-301S
Seattle 425-771-7776 | Tacoma 253-922-6087
Portland 503-641-3388 | Salt Lake City 801-878-976
Las Vegas 702-586-1152 | Boise 800-537-6848
www.KukerRanken.com
QUICK START GUIDE
WARNINGS
When used for extended periods of time the
Rugo
will become HOT to the touch.
™
Do not stare into the LEDs for long periods of
!
time or from a close range (less than 2 ft or
0.6 m).
!
This product is designed as an auxiliary lighting
tool to be used with photo, video, and film.
!
DO NOT use the Rugo
as a primary light source
™
for activities.
!
While using any FoxFury product, please operate
at safe speeds.
!
Be sure to rinse the Rugo
™
with fresh water
immediately after use in the ocean or a pool.
!
It is the responsibility of drone/UAV users to
follow the FAA laws and regulations and/or the
laws and regulations applicable to flight location.
IMPORTANT!
Please fully charge the Quick Swap
Power Pack
™
before using the Rugo
™
for the first time.
MOUNTS INCLUDED
STANDARD MOUNT
THUMBSCREWS (2)
WITH (2) KNOBS
(700-301 ONL Y)
¼"–20 AND
COLD-SHOE MOUNT
(700-301 ONL Y)
FULL ASSEMBL Y
¼"-20 MOUNT
POWER/MODE
SWITCH
TRI-LENS
CHARGE
INDICATOR
THUMBSCREWS
DISASSEMBLED LIGHT HEAD
LED CONTACT
CAVITY (2)
LED MODULE
SCREW HOLE (4)
O-RING
ACCESS SCREW
DISASSEMBLED POWER PACK
LOCKING POST
USB CHARGE PORT
POWER CONTACTS
CHARGING THE POWER PACK
1
™
Press and hold the Power Pack Release
Lever located on the Light Head portion of
the Rugo
.
™
(Rugo
in steps 1–3 shown with no mounts and is flipped to
™
show Power Pack Release Lever)
2
While maintaining pressure on the Power
Pack Release Lever, pull the Light Head
and Power Pack apart. If unable to pull
apart easily , try moving the Power Pack
back and forth while continuing to pull.
3
Insert the provided Micro USB Cable into
the Power Pack. Then, insert the opposite
end USB (Type A) into a USB compatible
power source.
OPERATIONAL MODES
MODES
RC (700-301)
DIM
70 LUMENS
LOW
200 LUMENS
MEDIUM
380 LUMENS
HIGH
620 LUMENS
R1S
RCS
MODES
(700-300S)
(700-301S)
LOW
70 LUMENS
70 LUMENS
MEDIUM
400 LUMENS
380 LUMENS
HIGH
700 LUMENS
620 LUMENS
STROBE
700 LUMENS
620 LUMENS
POWER PACK LIFE
700-301:
QUICK SWAP
®
POWER PACK (N50-200)
MODE
DURATION*
DIM
6.75 hours
LOW
3.5 hours
MEDIUM
1.5 hours
HIGH
1 hour
700-300S, 700-301S: QUICK SWAP
POWER PACK WITH STROBE (N50-220)
MODE
DURATION*
LOW
6.75 hours
MEDIUM
1.5 hours
HIGH
1 hour
STROBE
2.5 hours
*Power Pack life may vary according to age and ambient
conditions.
The Charge Indicator will turn green once
fully charged.
Charging time is about 2.5 hours.
Do NOT leave Power Pack charging for
extended periods of time.
When disassembled, keep both ends dry
and away from water.
7/2021
®