Daiwa RELAX2 ERO 2.0 Kullanım Talimatları Kılavuzu - Sayfa 8

Masaj Daiwa RELAX2 ERO 2.0 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Daiwa RELAX2 ERO 2.0 12 sayfaları. Massage lounger

SETUP

Carefully lift the chair and all its parts from their packaging. Remove any protective

wrapping. Locate the packing list. Check to make sure that all parts are present.

2. Attach the left and right armrests.

Locate the two holes (circled red in the picture) at the base of the left armrest.

Locate two identical screws, whose top, side, and inverted views are shown below:

Fit the two screws from step 2b into the two holes from step 2a. Turn each screw

until fully tightened.

To attach armrests to the backrest: Locate the two bolts along the top of the left

armrest that are already partially inserted.

Armrest

Air tube port

Air tube

connection

stick

Eccentric

joint

clockwise

fastening

Eccentric joint structure

SETUP

Locate the two holes (circled red in the picture) at the base of the left armrest.

Locate two identical screws, whose top, side, and inverted views are shown below:

Align these two bolts to two corresponding holes at the base of the left armrest.

Working from the back end of the chair to the front, tighten each of these screws.

Check to see that the armrest is properly assembled. Finally, rotate each screw a final

90° clockwise to fully tighten.

After the left armrest has been assembled, repeat the same process to attach the

right armrest.

Armrest lock

The connection of

eccentric joints

Handle of the lock