DSC FSD-100 Kullanıcı Kılavuzu - Sayfa 10

Duman Alarmı DSC FSD-100 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DSC FSD-100 16 sayfaları. Smoke detector sensitivity meter
Ayrıca DSC FSD-100 için: Kullanıcı Kılavuzu (16 sayfalar)

Sayfayı Yazdır
DSC FSD-100 Kullanıcı Kılavuzu
2.2

Smoke Detector Testing

1.
Follow the steps indicated in Figure 3 until the TRIGGER DEVICE WAIT
FOR BEEP screen appears.
2.
Press the LED/Test Button located on the smoke detector with the
tester.
3.
Position the FSD-100 less than 2.5cm (1") from the center dome of the
smoke detector.
The Smoke Detector and the FSD-100 Tester will indicate that data is being transmit-
ted and received by sounding a series beeps from each device.
When data transmission is completed, the beeping will stop and the FSD-100 tester
will display the TEST COMPLETE ! DATA SAVED screen followed by a 2 second delay.
4.
After the delay the PRESS * FOR DATA REVIEW screen will appear.
(a) Pressing
Records.
(b) Pressing the
Figure 3 - Testing
6
will begin the test review (see section 2.3 Viewing Test
or
keys will return you to the TESTER READY screen.
1 Minute
Window