DSC WLS916-433 Series Kurulum ve Kullanım Talimatları - Sayfa 3

Duman Alarmı DSC WLS916-433 Series için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları indirin. DSC WLS916-433 Series 4 sayfaları. Wireless smoke detector

Owners Instructions
Fire Safety In The Home
Most fires occur in the home, and to minimize this danger, it is rec-
ommended that a household fire safety audit be conducted and a
family escape plan be developed.
Household Fire Safety Audit
1.
Are all electrical appliances and outlets in safe condition?
Check for frayed cords, overloaded lighting circuits, etc. If
you are uncertain about the condition of your electrical appli-
ances or household service, have a professional evaluation.
2.
Are all flammable liquids safely stored in closed containers,
and in a cool and well ventilated area? Cleaning the unit with
flammable liquids should be avoided.
3.
Are hazardous materials such as matches out of the reach of
children?
4.
Are furnaces and wood burning appliances properly installed,
clean, and in good working order? If in doubt, have a profes-
sional evaluation.
Family Escape Planning
There is often very little time between the detection of a fire and
the time it becomes deadly. Because of this, it is very important
that a family escape plan be developed and rehearsed.
1.
Every family member should participate in developing the
escape plan.
2.
Study the possible escape routes from each location within
the house. Since many fires occur at night, special attention
should be given to the escape routes from sleeping quarters.
3.
It is essential that escape from a bedroom be possible without
opening the interior door. Consider the following when mak-
ing your escape plans:
Ensure that doors and windows that open to the outside are
easily opened. Ensure that they are not painted shut and that
the locking mechanisms operate smoothly.
If opening the exit or using the exit is too difficult for chil-
dren, the elderly or handicapped, plans for their rescue
should be developed. This plan includes making sure that
those who are to perform the rescue can promptly hear the
fire warning signal.
If the exit is above the ground level, an approved fire ladder
or rope should be provided, as well as training in its use.
Exits on the ground level should be kept clear. Be sure to
remove snow from exterior patio doors in the winter and that
outdoor furniture or equipment does not block exits.
The family should have a predetermined assembly point
where everyone can be accounted for; for example, across
the street or at a neighbor's house.
Once everyone is out of the house, call the Fire Department.
A good plan emphasizes a quick escape. Do not investi-
gate first or attempt to fight the fire, and do not attempt to
rescue belongings or valuables as this takes up time.
Once outside, do not re-enter the house; wait for the Fire
Department.
Write the plan down and rehearse it frequently so that should
an emergency ever arise, everyone will know what to do.
Revise the plan as conditions change; for example, when
there are more or fewer family members in the home or if
there are changes to the house.
Make sure your fire warning system is operational by con-
ducting weekly tests. If you are unsure about system oper-
ation, contact your smoke detector installer or dealer.
DSC recommends that you contact your local Fire Depart-
ment and request further information on home fire safety
and escape planning. If available, have your local fire preven-
tion officer conduct an in-house fire safety inspection.
Testing Your Smoke Detector
Follow the test procedure described here or contact
your smoke detector dealer or installer for testing
instructions.
DSC recommends that your entire alarm system be
tested at least once a week to verify the operation of
all system functions.
Smoke Detector Unit Test
To test the smoke detector, press and hold the test button on the
front of the unit. When the button is pressed, the unit's alarm
should sound. When the button is released, the alarm should
cease. If this does not occur, check that the batteries are the cor-
rect type, in good condition and are installed correctly (see the
'Battery Installation' section below).
Upon completing the functional testing of the smoke detector,
check the unit's sensing chamber to ensure proper operation. To
test the sensing chamber, wave a lit cotton wick or punk stick
around the outside of the unit until a generous amount of smoke
enters the sensing chamber or the unit alarms. If the smoke detec-
tor does not function properly, call your smoke detector installer or
dealer for service.
Maintenance
The smoke detector is designed to require minimum maintenance.
If the case becomes dusty, vacuum with a small brush attachment.
If the case is greasy, wipe the case gently with a soft cloth slightly
dampened with soapy water.
Never disassemble the smoke detector; there are no
user serviceable parts inside the unit. Never paint the
unit. Paint may prevent smoke from entering the unit.
If you are planning renovations or repainting, contact
your installer and ask that the unit be temporarily
removed until work is complete.
If the unit is located in an area where it is exposed to high levels of
dust or insects and causes false alarms, it may require service; con-
tact your smoke detector installer or dealer.