DSE RH Series Manuel - Sayfa 7

Güvenlik Kamerası DSE RH Series için çevrimiçi göz atın veya pdf Manuel indirin. DSE RH Series 12 sayfaları. Ip anpr cameras with ocr
Ayrıca DSE RH Series için: Konfigürasyon (12 sayfalar)

Sayfayı Yazdır
DSE RH Series Manuel
ANPR. MANUAL
RH SERIES - PLATE READING IP CAMERAS
Page:7
In order to change these settings you must first change the mode in the lower left, from Standard
Mode to Debug mode as in the figure below. The debug mode allows you to modify the sensor
parameters and then save and return to the Standard operating mode.
The debug mode allows you to set up to 4 customized configurations (DIAGRAM 1,2,3,4) to be
activated according to the situation. These license plate cameras use the first 2 configurations:
SCHEMA1 during the day and SCHEMA2 at night which are already configured at the factory for
an optimal recovery in the two situations.
The recommended operating mode is to set the switch from SCHEMA1 TO SCHEMA2 by following
the illumination of the camera lights. To do this you need to activate the DNLinkageMode
function.
DSE SRL - ITALY - WWW.DSE.EU