Ansr Audio Scan700 Kullanıcı Kılavuzu - Sayfa 5
Mikrofon sistemi Ansr Audio Scan700 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ansr Audio Scan700 16 sayfaları. Frequency agile wireless microphone system
Sayfayı YazdırAW-75
10. RF Level Indicator: 5- segment meter glows to indicate RF signal strength. For this, more is
better. If no signal is indicated, your receiver will mute.
11. AF Level Indicator: 5- segment meter glows to indicate RF signal strength. Will move with
your voice level. Try to keep louder passages from staying in the red.
Scans upward to find the next interference-free channel.
15. Volume Control: Use rotary control to adjust the receiver output level to match with the input
sensitivity of an audio mixer or an amplifier.
Effectively limits the operating area of the system to help eliminate outside interference.
The higher the squelch control, the smaller the service area of the system. If you need to adjust this,
set the squelch to minimum (larger area), raise until signal is affected, and then back off to make sure
that the required operating area is covered, but not alot more.
22. DC OUT: Use this to connect the supplied cable from the receiver to the microphone or
transmitter for charging.
manually.
(1/4 inch)
4
1/4 inch