DSE DSE2157 Kurulum Talimatları Kılavuzu - Sayfa 15
Kontrol Ünitesi DSE DSE2157 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. DSE DSE2157 15 sayfaları.
DSEGenset
DSE2157
DSENET
OUTPUT EXPANSION MODULE
®
KEY FEATURES
•
Power On/Link Lost LED ID
SWITCH
•
10 expansion modules can be
connected to 1 host controller at
a time
•
8 configurable relay contacts
with LED indicators:
- 4 Normally Open (N/O)
- 4 Change Over (C/O)
•
Terminal strip connection for
quick and easy set-up
RELATED MATERIALS
TITLE
DSE2157 Installation Instructions
DSE2157 Operator Manual
DEEP SEA ELECTRONICS PLC UK
Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303
EMAIL [email protected] WEBSITE www.deepseaplc.com
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change
the details shown on this data sheet without prior notice. The contents are intended for guidance only.
ID SWITCH
The rotary ID switch is used to
select the address of the DSE2157
expansion module, as the host
control module is capable of giving
instructions to a number of
DSE2157 expansion modules at
the same time.
PART NO'S
053-034
057-083
DEEP SEA ELECTRONICS INC USA
3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL [email protected] WEBSITE www.deepseausa.com
Registered in England & Wales No.01319649
VAT No.316923457
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is
achieved without the need for internal
batteries. LEDs and backlight will not be
maintained during cranking.
MAXIMUM OPERATING CURRENT
325 mA at 12 V, 152 mA at 24 V
MAXIMUM STANDBY CURRENT
70 mA at 12 V, 32 mA at 24 V
AUXILIARY RELAY CONTACTS
2 Amp DC rated voltage free
DIMENSIONS
OVERALL
165 mm x 76 mm x 49 mm
6.5" x 3" x 1.9"
055-061/10/10 (3) US
®