ADDA-TOP T-TOP Kurulum Kılavuzu - Sayfa 5

Tekne Ekipmanları ADDA-TOP T-TOP için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ADDA-TOP T-TOP 11 sayfaları.

Take each designated leg and align with the pre-drilled holes in the top. Use the (8) 3/8"

Stainless Pan head screws and fasten. The (2) shorter pan head screws are for the rear pads.

The two large mounting pads on the tower go to the front and the small pads go to the rear.

(** we recommend applying anti-seize or 5200 for installing stainless hardware, Take a 3/8"

bolt and run anti-seize or 5200 marine silicone in and out of all pads before installing).

Tighten each bolt by hand to start and avoid cross-threading. Using an Allen wrench, tighten

each bolt the rest of the way.

5 | P a g e