DSG Technology GoldStar 970 Hızlı Başlangıç - Sayfa 2

Telefon DSG Technology GoldStar 970 için çevrimiçi göz atın veya pdf Hızlı Başlangıç indirin. DSG Technology GoldStar 970 2 sayfaları.

Sayfayı Yazdır

For Static IP

(a) When the IP TYPE

"Static

(b) Use the telephone keypad to input one of the available IP addresses. Press

to go to

GATEWAY IP

(d) Input the gateway IP address with your telephone keypad. Please check your ISP or network administrator for the information. Press

(e) Press

to go to

SUBNET

( f ) Input your subnet mask and then press

(g) Press

again to go to

OFFHOOK

and exit.

(h) Now you've entered Internet connection information. Press

will automatically reload the Ethernet.

For DHCP

(a) When the IP TYPE "DHCP" is selected, pick up the telephone handset and press

press

to select

PSTN

(b) Now you've entered Internet connection information. Press

several times until you see

For ADSL PPPoE

(a) When the IP TYPE

"ADSL

(b) Use the telephone keypad to input the

to go to

PPPoE

PASSWORD. Press

(d) Press

again to go to

OFFHOOK

and exit.

(e) Now you've entered Internet connection information. Press

will automatically reload the Ethernet.

4. Input Required Information for Device-to-Phone Mode

(1) Press and hold

button for 2 seconds and the screen will display your working mode. Pick up the telephone handset and press

until the screen shows

ITSP

(2) Press

and the screen will display

(3) Use your telephone keypad to enter the ITSP account number. Press

to make a Device-to-Phone call. If there's no balance remained in your ITSP account, you can contact your local dealer or e-mail to

(4) You have now entered required information for Device-to-Phone mode. Press

Operation Mode

Congratulations! You've successfully completed the settings. You can start to talk to anyone over Internet/Intranet by following the instructions below.

Note: If you see a static @ sign on the LCD screen, that means the

LCD screen, it means the

Note: After the

connects to the Internet, you can press

Device-to-Phone

(1) Modem Dialup User:

Pick up the handset and press

to the Internet. When you see a static @ sign on the LCD screen,

it means it has connected to the Internet. Please wait until you

hear the ready tone.

Ethernet User:

First be sure you see a static @ sign on the LCD screen. Pick up the handset directly and you will hear the ready tone. If you set the

MODE" as "PSTN", you have to press

(2)

Now you can start to dial any long-distance or international telephone numbers. No matter where you are, the dialing rules of long-distance calls or

international calls are the same as follows:

Please refer to the following examples.

To make an international call from any country to Japan

[ Japan Country Code ]

Note: If you find any serious delay or interruption during the conversation while using

ISPs. You can hang up and try to call again later to see if the transmission improves. If you have any further question, please refer to the

Operation Manual or visit

IP" is selected, pick up the telephone handset and press

and press

to edit this item.

MASK. Press

to edit this item.

to save and exit. Please check with your ISP or network manager for the information.

MODE. Press

to edit this item and press

or I-PHONE. Press

again to save and exit.

EXIT SETUP

and then press

PPPoE" is selected, pick up the telephone handset and press

ADSL PPPoE ID

and then press

to edit this item. After you input the password, press

MODE. Press

to edit this item and press

SETUP.

ITSP

ACCOUNT. Press

is not connected to the Internet.

on your

to connect

first and wait for the ready tone before you call.

[ Country Code ]

[ Japan Area Code ]

[ Japan Tel. No. ]

55551234

www.dsgtechnology.com

for more details.

to access to

again to save and exit.

to select PSTN or I-PHONE. Press

several times until you see

EXIT TO

to go to

OFFHOOK

several times until you see

EXIT TO

to exit.

to go to

again to save and exit.

to select PSTN or I-PHONE. Press

several times until you see

EXIT TO

again to edit this item.

on your

to save and exit. You must have a valid ITSP account in order

several times until you see

has connected to the Internet successfully. If you see a flashing @ sign on the

on the telephone keypad to display your ITSP account balance on the screen.

[ Area Code ]

[ Telephone Number ]

To make a long-distance call within U.S.

[ USA Country Code ]

, it is an indication of congested data transmission between

ADDRESS. Press

to edit this item.

MAIN. Press

to save and exit. The system

MODE. Press

to edit this item and

MAIN. Press

to save and exit. Press

ADSL PPPoE

ID. Press

to edit this item.

to save and exit.

MAIN. Press

to save and exit. The

[email protected].

EXIT TO

MAIN. Press

VoIP Gateway

PSTN

"OFFHOOK

[ USA Area Code ]

[ Telephone Number ]

212

to save and exit.

again to save

several times

to save and exit.

Destination Phone

5551234