ADDAC System ADDAC104 Montaj Kılavuzu - Sayfa 8

Kontrol Ünitesi ADDAC System ADDAC104 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. ADDAC System ADDAC104 12 sayfaları. Vc t-networks module

Sayfayı Yazdır

ADDAC104 Assembly Guide

STEP 8:

Next proceed to prepare the vactrols, bend all legs down (logo facing up) and cut them aprox. 12mm like

shown below.

STEP 9:

Start by getting the vactrol in place than

solder each leg flush to the

pcb, do not insert the vactrol legs

all the way down as this may cause shorts on front side of the pcb.

Solder them as flush as possible and

in the orientation shown below.

ADDAC SYSTEM

page 8