DSM VF-500 Kullanıcı Kılavuzu - Sayfa 2

Amplifikatör DSM VF-500 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DSM VF-500 8 sayfaları. Voltage follower / linear amplifier for piezoelectric (capacitive) loads

Sayfayı Yazdır

VF-500 LINEAR PIEZOELECTRIC AMPLIFIER

Please review the following points for both personal and equipment safety while operating the

linear piezoelectric amplifier.

HIGH ENERGY/VOLTAGE WARNINGS

Exercise caution when using amplifiers. High energy level can be

stored at the output voltage terminals on all amplifiers in normal

operations. In addition, potentially lethal voltages exist in the power

circuit and the output screw terminals. Filter capacitors store

potentially dangerous energy for some time after power is removed.

AC SOURCE GROUNDING WARNING

Ensure that the amplifier's power supply is connected to a grounded AC outlet with the

recommended AC input connector configured for the available line voltage.

OPERATING AND SERVICES PRECAUTIONS

Operate the amplifier in an environment free of flammable gases or fumes. To ensure that its

safety features are not degraded , do not use substitute parts or make any unauthorized

modifications to the amplifier. Contact DSM for service and repair assistance.

VF-500 SPECIFICATIONS

• Output Voltage:

• Input Voltage Signal (gain = 20):

• Maximum Continuous Current:

• Maximum Peak Current:

• Dimensions:

• Operating Voltage:

• Amplifier bandwidth:

• Electrical Noise on Output:

• Short circuit, over-current, and over-temperature protection

• Output Connector:

• Input Connector:

NOTE: The output voltage is configured at the factory and is not re-configurable in the field.

-30/+150V or -30/+200V

-1.50V to +7.50V (for –30/+150V unit)

-1.50V to +10.0V (for –30/+200V unit)

500mA, > 5msec

1000mA, < 5msec

100mm x 240mm x 330mm (4" x 9.5" x 13")

85 ~ 264VAC, 47 ~ 63Hz

5kHz

4mVrms

SMA

BNC

114 Southeast Parkway Court, Suite 160

Franklin, TN 37064

Tel: 615/595-6665

Fax: 615/595-6610

CAUTION

RISK OF DANGER