DSPPA DMA6250U Kullanıcı Kılavuzu - Sayfa 10

Amplifikatör DSPPA DMA6250U için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DSPPA DMA6250U 14 sayfaları.

Operating Instructions

1. Initial Start-up

When starting up the stereo amplifier for the first time, do as follows:

Turn down the total volume.

Turn down the zone volume.

Connect the stereo amplifier to the power supply; Turn on the amplifier till the power indicator is on.

Turn the total volume to the optimal level.

Adjust the zone volume until it reach the desired volume output. If you need to change the wiring or

installation, make sure to disconnect the power cord from the device first.

2. Mic Broadcast

Conduct MIC broadcast in any mode, the system detects the microphone's voice and mutes other audio

sources; When the microphone has no signal, it automatically backs to the original playback state.

3. Bluetooth Mode

Press the MODE button until the digital screen displays Bluetooth and Bluetooth name, as shown below, then

please open the cellphone or other Bluetooth devices, find the device with Bluetooth name of "6 ZONES AMP

BT" for pairing. After that, music can be streamed from phone (when the device and cellphone Bluetooth pairing

successful, the digital display will stop flashing), wireless transmission distance is about 10m.

4. USB Mode

When insert a USB, it will automatically come to USB mode (plug and play). As shown below, the interface

displays the current playing song name, playing duration, playing mode, playing status and volume level. In USB

mode, short press LOOP button to switch the playback mode to random play, single loop, directory loop.

5. Line Mode

Press the MODE button until the digital screen displays AUX to enter Line Mode, as shown below.

Random Play

Directory Loop

Single Loop