3ntr A4 V2 Hızlı Başlangıç Kılavuzu - Sayfa 18

3D Yazıcılar 3ntr A4 V2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3ntr A4 V2 20 sayfaları. 3ntr a4 v2 3d printer quick start

Firmware upgrade (Windows PCs only, sorry!)

You should download the upload tool first:

http://3ntr.eu/wp-content/uploads/2014/08/XLoader.zip

The Xloader tool is © Geir Lunde: unzip it in any place you prefer on your HD, then

download the latest firmware for your printer from this page

http://3ntr.eu/?page_id=182

Before launching the firmware upgrade, you MUST quit any other program connected with

the printer (i.e.: Repetier Host).

Start the Xloader tool, you should get this small window pop up on your screen:

Illustrazione 12: Xloader tool

The first line is used to find the *.hex firmware file you downloaded from our site, the

second line (device) must be set to Mega(ATMEGA2560), then the COM port should be

set to the same COM port you use to connect with Repetier Host. Baud Rate is

automatically set to 115200 as you choose the above said device.

Click on Upload and wait: depending on your PC speed it may take a few minutes to

complete.

When completed, the bottom of the Xloader window will report the bytes successfully

uploaded.