Attero Tech unD3IO Kullanıcı Kılavuzu - Sayfa 8

I/O Sistemleri Attero Tech unD3IO için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Attero Tech unD3IO 17 sayfaları. 2-in/2-out dante wallplate with multi-io analog connectivity

Sayfayı Yazdır

For the same connections but using a 2-core + shield cable, connect the positive and grounds as before but this time,

short the negative conductor to the shield at the source connection instead.

Figure 4 - 3-Wire Unbalanced Source to Balanced Sink Connection

2.2.3 – Balanced Source to Unbalanced Sink

Use the following if using a single core cable with shield to connect a balanced source to an RCA or stereo jack input on

the unD3IO or to connect the XLR output from the unD3IO to an unbalanced input on another device. Connect the

positive output of the balanced source to the positive input of the unbalanced sink. Connect both the source and sink

input grounds together and short the negative input of the source to ground at the output of the source.

Figure 5 - 3-Wire Balanced Source to Unbalanced Sink Connection

For the same connections but using a 2-core + shield cable, connect the positive and grounds as before but instead,

short the negative conductor to the shield at the sink end of the cable instead.

Figure 6 - 3-Wire Balanced Source to Unbalanced Sink Connection

2.2.4 – Unbalanced Output to an Unbalanced Sink

To connect an unbalanced source to unD3IO RCA or stereo jack input, or connect the stereo jack output to an

unbalanced sink, connect the positive output to the sink's positive input and connect the grounds together through the

cable shield.

 Attero Tech LLC 2018

Source

Figure 7 – Unbalanced Source to Unbalanced Sink Connection

Sink

Shield

Sink

Shield

Sink

Shield

Sink

Shield

Page 7

unD3IO

User Manual

614-00017 Rev 05_a