ATTIAS USA-80 Kurulum ve İşletim - Sayfa 4

Mikser ATTIAS USA-80 için çevrimiçi göz atın veya pdf Kurulum ve İşletim indirin. ATTIAS USA-80 11 sayfaları. Commercial dough mixers

CHANGING SPEEDS

The GEAR SHIFT LEVER is used to change speed. Always stop mixer before

changing speeds. To change speed, push the STOP button, move the gear shift

lever to the desired speed, and restart the mixer by pushing START button.

NOTE: If you do not stop the mixer to change speeds, it will automatically shut

itself off and you will have to restart it after changing speeds.

STANDARD BOWL LIFT

The handwheel is used to raise and lower the bowl on mixers with the standard bowl

lift. Turn the handwheel clockwise to raise the bowl or counterclockwise to lower it.

POWER BOWL LIFT (Optional)

CAUTION: Before lowering the bowl onto a bowl dolly, always unlock both

bowl clamps.

To raise the bowl and the bowl support, move the switch lever clockwise to the RAISE

position.

To lower the bowl and bowl support, move the switch lever counterclockwise to the

LOWER position.

In case of a power failure, the bowl may be raised or lowered manually. Remove the

apron (secured by four thumb screws) and use 1 inch open-end wrench to turn the lift

screw hex in the desired direction.

MIXING

This section explains operation of the mixer and how to install bowl, agitators, and

attachments. A separate

which contains information on mixing procedures and outlines specific uses for

agitators, attachments, and accessories.

Bowl

New mixer bowls and agitators (beaters, whips, and dough arms) should be thoroughly

washed with hot water and a mild soap solution, rinsed with either a mild soda or

vinegar solution, and thoroughly rinsed with clear water BEFORE being used. This

Use and Applications Handbook

is provided with the mixer