DT Research DT313Cmed Temel Kullanım Kılavuzu - Sayfa 3

Tablet DT Research DT313Cmed için çevrimiçi göz atın veya pdf Temel Kullanım Kılavuzu indirin. DT Research DT313Cmed 4 sayfaları. Medical mobile tablet

Sayfayı Yazdır

OPERATION

Powering ON and OFF

To activate the DT313C/Tmed, push and quickly release the Power Button. The display

will come on in a few seconds. To put the DT313C/Tmed in Standby mode, push and

quickly release the Power Button. To turn the DT313C/Tmed oﬀ for extended storage,

power oﬀ safely using any software function that "shuts down computer" provided in

the software operating system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use

the AC-DC adapter with the DT313C/Tmed when setting up for the first time

to fully charge the internal battery pack. You may charge the external battery

pack with it attached to the DT313C/Tmed, or with the optional external

battery charger kit.

NOTE:

When the batterypack(s) is (are) charging, the blue-colored Battery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking

activity and the LED stays dark, the battery pack(s) may have been drained

substantially. Try unplugging/ replugging the AC-DC adapter to the DT313C/

Tmed a few times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in "Standby" mode while not in use. Pushing briefly on the same button

will wake up the system within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn oﬀ the

tablet—this form of hardware shutdown is intended to be a means of recovery

from lockups, and not as normal operation.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT313C/Tmed may be configured using the utilities and methods dictated by

the software operating system. The DT313C/Tmed should be configurable for

various properties such as user profiles, network features, and

several system elements.

Wireless Networking

Wireless LAN

The DT313C/Tmed is often delivered with an embedded (user-inaccessible)

802.11ac WLAN adapter equipped with a hidden custom antenna.

•

Through the support of typical WLAN adapters, the DT313C/Tmed should be

able to detect all 802.11 access points in the vicinity for you to select the

access point of your choice for connection.

•

The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT313C/Tmed

and the access points have to match. The SSID is case-sensitive and it is

recommended that you enable WEP/WPA/WPA2 encryption (or advanced

alternatives) for secure access.

•

When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly configure

associated settings such as Authentication mode, etc.

•

Refer to the access point operating manuals for setting up the 802.11 access

points.

Bluetooth

The DT313C/Tmed oﬀers the Bluetooth module which supports Bluetooth 4.0

standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy, which

delivers faster speeds (up to 300 Mbps) with low power consumption.