DT Research DT365 Temel Kullanım Kılavuzu - Sayfa 4

Tablet DT Research DT365 için çevrimiçi göz atın veya pdf Temel Kullanım Kılavuzu indirin. DT Research DT365 9 sayfaları. Mobile tablet
Ayrıca DT Research DT365 için: Temel Kullanım Kılavuzu (4 sayfalar)

Sayfayı Yazdır

DT365

OPERATION

Powering ON and OFF

To activate the DT365, push and quickly release the Power Button. The display will come on in a few seconds.

To put the DT365 in Standby mode, push and quickly release the Power Button. To turn the DT365 off for

extended storage, power off safely using any software function that "shuts down computer" provided in the

software operating system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use the AC-DC adapter with

the DT365 when setting up for the first time to fully charge the internal battery pack. You may charge

the external battery pack with it attached to the DT365, or with the optional external battery charger

kit.

NOTE:

When the battery pack(s) is (are) charging, the blue-colored Battery LED should blink slowly. If

plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the

battery pack(s) may have been drained substantially. Try unplugging/ replugging the AC-DC adapter

to the DT365 a few times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the tablet in "Standby"

mode while not in use. Pushing briefly on the same button will wake up the system within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the tablet—this form of hardware

shutdown is intended to be a means of recovery from lockups, and not as normal operation.

ENGLISH