DT Research WebDT 310 Temel Kullanım Kılavuzu - Sayfa 4
Tablet DT Research WebDT 310 için çevrimiçi göz atın veya pdf Temel Kullanım Kılavuzu indirin. DT Research WebDT 310 4 sayfaları. Mobile tablet
Sayfayı Yazdır
THE WebDT 310
Bluetooth
The WebDT 310 features a built-in Bluetooth adapter that operates on the
Microsoft Windows Bluetooth protocol. The Bluetooth configuration application
is invoked from the System Tray or from the Control Panel for Windows XP.
Under Windows CE, it can be executed from the Control Panel. Follow the
instructions and options provided within the application to configure and
invoke Bluetooth connectivity with the corresponding peripherals.
NOTE: Bluetooth devices or accessories that are not compatible with the
Microsoft Windows Bluetooth protocol may not work with the WebDT 310.
Button Management
Where supported by software, many of the hard buttons on the WebDT 310
are programmable to perform a function of the user's choice. The exception
is the Power Button and the SAS Button. To activate the button re-assignment
application, invoke the Button Agent application, e.g., in Windows XP
Embedded
.
Brightness Control
Where supported by device firmware and software, a hard button may be
engaged to manipulate the display brightness. Press the System Menu button
(Button 7) on the front of the WebDT 310. The System screen will display a
Brightness control section with up and down arrows that can be activated with
the stylus.
Battery and Power Management
The WebDT 310 is equipped with an internal Li-Ion battery pack that is capable
of supporting approximately 1.5–2 hours of continuous operation. The period of
continuous operation can be extended by approximately 3–4 hours with the
external battery pack that clips (hot-pluggable) onto the back of the device.
The period between battery recharges can be significantly lengthened by
putting the device into Standby mode through the Power Button (see Buttons
Function Table) whenever the device is not in use. Depending on the operating
software, the WebDT 310 may also be configured to enter various power-saving
modes via the Power Button or through timed entry.
6
ENGLISH
Desktop Cradle
The WebDT 310 is complemented by an optional Desktop Cradle for support,
pass-through charging, and connection to a range of USB peripherals, including
keyboard and mouse. The Cradle offers the following interfaces: a DC-in port for
the AC-DC adapter, an Ethernet port, and USB ports. Always seat the WebDT 310
securely onto the cradle. The cradle must be powered by the AC-DC adapter
for the Ethernet and USB ports to function. The battery packs on the WebDT 310
may be recharged by connecting the AC-DC adapter directly to the DC-in port
on the WebDT 310 or through the DC-in port on the Desktop Cradle while the
WebDT 310 is docked to the Cradle.
USING THE WebDT 310
Memory configuration
The WebDT 310 is available in various memory configurations. They currently
range from: 64MB to 8GB of flash memory and 256MB, 512MB, or 1GB of RAM.
Peripherals Support
Through its USB ports, the WebDT 310 supports a wide range of USB-based
peripherals. These peripherals are applicable for software installation,
applications storage, data storage, and system software recovery and updates.
The WebDT 310 is equipped with a built-in VGA port, allowing displayed content
to be mirrored on an external display for clear, shared viewing. The WebDT 310
is also compatible with custom mountable cradle options. These securable and
mountable cradles provide an interface to VESA mounts and arms, and to ports
that may include USB, Ethernet and pass-through power.
Remote Management
Depending on software configuration, the WebDT 310 can be centrally managed
for asset monitoring and for software control. Please consult your device
provider.
7
ENGLISH