DT Research DT592IB Temel Kullanım Kılavuzu - Sayfa 2
Masaüstü DT Research DT592IB için çevrimiçi göz atın veya pdf Temel Kullanım Kılavuzu indirin. DT Research DT592IB 2 sayfaları. Medical cart computer
Sayfayı Yazdır
DT592IC/ DT592IB
Precautions
•
Always exercise care when operating and handling the DT592IC/ DT592IB.
•
Never disassemble any portion of the enclosure, as this will void any product warranty on the
DT592IC/ DT592IB.
•
Do not use any AC/DC adapter other than the one provided with the device or a replacement
acquired from the manufacturer.
•
In the unlikely event that smoke, abnormal noise or strange odor is present, immediately power
down the DT592IC/ DT592IB and disconnect all power sources. Please report the problem to
your device provider immediately.
Basic Features
The DT592IC/ DT592IB integrates a bright 21.5" display with capacitive touch, USB ports, and
is complemented by a suite of options including a front camera and a smart card reader for
comprehensive point-of-care applications.
Powering ON and OFF
If your DT592IC/ DT592IB comes with the battery packs, please open the battery slot caps and
then put in the battery packs one by one. If not, please use the AC-DC adapter with the DT592IC/
DT592IB for the power supply. To activate the DT592IC/ DT592IB, push and quickly release the
Power Button and the display will come on in a few seconds. To put in Standby mode, push and
quickly release the Power Button. To turn off for extended storage, power off the device safely using
any software function that "shuts down computer" provided in the software operating system.
NOTE: The battery packs shipped with your device may be low in power—please use the AC-DC
adapter with the DT592IC/ DT592IB when setting up the device for the first time to fully charge
the internal battery packs. You may charge the external battery packs with them attached to the
DT592IC/ DT592IB, or with the optional battery charger kit.
NOTE: When the battery pack(s) is (are) charging, the blue-colored Battery LED should blink slowly.
If plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the
battery pack(s) may have been drained substantially. Try unplugging/ replugging the AC-DC adapter
to the DT592IC/ DT592IB a few times to activate the charging process.
NOTE: To conserve power, use (push and quick release) the Power Button to put the device in
"Standby" mode while not in use. Pushing briefly on the same button will wake up the system
within seconds.
NOTE: Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the device—this form
of hardware shutdown is intended to be a means of recovery from device lockups, and not as
normal operation.
2
ENGLISH
Power/Battery LED Status
•
Blue indicates the battery is 25% to 100% charged
•
Blinking blue indicates the battery is charging
•
Orange indicates that the battery is between 11% to 25%
•
Blinking Orange indicates that the battery is below 10%
Wireless Networking
Wireless LAN
The DT592IC/ DT592IB is often delivered with an embedded (user-inaccessible) 802.11a/b/g/n
WLAN adapter equipped with a hidden custom antenna.
•
Through the support of typical WLAN adapters, the The DT592IC/ DT592IB should be able to
detect all 802.11 access points in the vicinity for you to select the access point of your choice for
connection.
•
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT592IC/ DT592IB and the access
points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/
WPA/WPA2 encryption (or advanced alternatives) for secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly configure associated settings such as Authentication
mode, etc.
•
Refer to the access point operating manuals for setting up the 802.11 access points.
Bluetooth
The DT592IC/ DT592IB features a built-in Bluetooth adapter that operates on the Microsoft
Windows Bluetooth protocol. The Bluetooth configuration application is invoked from the System
Tray or from the Control Panel. Follow the instructions and options provided within the application
to configure and invoke Bluetooth connectivity with the corresponding peripherals.
NOTE: Bluetooth devices or accessories that are not compatible with the Microsoft Windows
Bluetooth protocol may not work with the DT592IC/ DT592IB.
Battery Indicator
3
ENGLISH