DT Research DT301 Temel Kullanım Kılavuzu - Sayfa 4

Akü Şarj Cihazı DT Research DT301 için çevrimiçi göz atın veya pdf Temel Kullanım Kılavuzu indirin. DT Research DT301 9 sayfaları. Battery charger kit
Ayrıca DT Research DT301 için: Temel Kullanım Kılavuzu (2 sayfalar)

Sayfayı Yazdır

DT301

OPERATION

Internal Battery

Warning

The Internal battery pack should only be replaced by an authorized DT Research service representative.

Please contact your product and/or service provider for internal battery replacement service.

Powering ON and OFF

To activate the DT301, push and quickly release the Power Button. The display will come on in a few seconds.

To put the DT301 in Standby mode, push and quickly release the Power Button. To turn the DT301 off for

extended storage, power off safely using any software function that "shuts down computer" provided in the

software operating system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use the AC‐DC

adapter with the DT301 when setting up for the first time to fully charge the internal battery

pack. You may charge the external battery pack with it attached to the DT301, or with the

optional external battery charger kit.

NOTE:

When the battery pack(s) is (are) charging, the blue‐colored Battery LED should blink slowly. If

plugging in the AC‐DC adapter does not trigger this blinking activity and the LED stays dark,

the battery pack(s) may have been drained substantially. Try unplugging/ replugging the

AC‐DC adapter to the DT301 a few times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the tablet in

"Standby" mode while not in use. Pushing briefly on the same button will wake up the system

within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the tablet—this form of

hardware shutdown is intended to be a means of recovery from lockups, and not as normal

operation.

ENGLISH