DT SWISS RATCHET EXP OS Teknik Kılavuz - Sayfa 16

Anahtar DT SWISS RATCHET EXP OS için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. DT SWISS RATCHET EXP OS 20 sayfaları.

NOTE: The hub must not be supported by

the ball bearing on the non-drive side when

pressing in the hub seal.

3. Put the mounting tool with the hub seal

onto the axle.

4. Push on the installation cylinder and drive

in the hub seal with slight hammer strokes.

2.14 MOUNTING THE FREEWHEEL SYSTEM

DANGER

RISK OF INJURY DUE TO LIMITED FREEWHEEL FUNCTION DUE TO INCORRECT

LUBRICATION!

If too much grease is applied on the ratchets, the actuation of the ratchets may not work. The

ratchets may slip during pedaling.

• Only apply a thin, even layer of grease.

• Only use the red DT Swiss special grease.

1. Apply DT Swiss special grease evenly to the

outer and the inner toothing of the ratchets

using a fine brush.

→ For an optimal functionality of the

freewheel system, a thin layer of grease

is sufficient.