DTC SOL8SDR-C Hızlı Başlangıç Kılavuzu

Ağ Donanımı DTC SOL8SDR-C için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. DTC SOL8SDR-C 3 sayfaları.
Ayrıca DTC SOL8SDR-C için: Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Revision: 2.0
Overview
This quick start guide provides instructions and diagrams describing how to quickly connect and
configure the SOL8SDR-C device to join a Mesh network.
Note: If configuring as a SOL-TX or SOL-RX, please refer to the relevant user guides.
Supporting software applications and detailed user guides can be downloaded from DTC's WatchDox
facility. Please contact the DTC support team:
Phone US: +1 571 563 7077
Phone UK: +44 1489 884 550
Email US:
Email ROW:
Connections
The minimum connections required for an SDR-C to join a Mesh network are power and antennas. An
Ethernet connection to a PC is required for initial configuration.
Note: The power source must be 8-18VDC.
Depending on how the SDR-C is to be deployed, a video source, audio headset, or serial data
connections may be attached for additional functionality. Additionally, an optional amplifier integration
can boost the power output, thereby, increasing range. Please refer to the user guides for details.
Note: The cables in the image below are provided for illustration, a full list of cable options can be
found in the datasheet or user guide.
Copyright © 2023 Domo Tactical Communications (DTC) Limited. All rights reserved.
SOL8SDR-C Quick Start Guide
Commercial in Confidence
(no restricted content)
(no restricted content)
Page 1