3onedata IES3016 Series Kullanıcı Kılavuzu - Sayfa 4
Anahtar 3onedata IES3016 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3onedata IES3016 Series 4 sayfaları. Industrial ethernet switches
Sayfayı Yazdır
length depends on actual position;
4. All the cable cannot have break-down and terminal in the
middle;
5. Cables should be straight in the hallways and turning;
6. Cable should be straight in the groove, and cannot beyond the
groove in case of holding back the inlet and outlet holes.
Cables should be banded and fixed when they are out of the
groove;
7. User cable should be separated from the power lines. Cables,
power lines and grounding lines cannot be overlapped and
mixed when they are in the same groove road. When cable is
too long, it cannot hold down other cable, but structure in the
middle of alignment rack;
8. Pigtail cannot be tied and swerved as less as possible.
Swerving radius cannot be too small (small swerving causes
terrible loss of link). Its banding should be moderate, not too
tight, and should be separated from other cables;
9. It should have corresponding simple signal at both sides of the
cable for maintaining.
【Specification】
Technology
Standard: Support IEEE802.3, IEEE802.3u, IEEE 802.3x,
Flow control: IEEE802.3x flow control, back press flow control
Exchange attribute
100M forward speed: 148810pps
Transmit mode: store and forward
System exchange bandwidth: 12.8G
MAC address table: 8K
Memory: 4M
Interface
Electric port: 10Base-T/100Base-TX auto speed control, Half/full
duplex and MDI/MDI-X auto detect
100M optic fiber port: 100Base-FX, SC/ST/FC connector, support
single mode （20/40/60/80Km optional）, multi
mode (2Km), wavelength: 1310nm, 1550nm
Transfer distance:
Twisted cable: 100M (standard CAT5/CAT5e cable)
Multi-mode: 1310nm, 2Km
Single-mode: 1310nm, 20/40/60Km
1550nm, 80/100/120Km
LED indicator:
Run indicator: Run
Interface indicator: Link (1~16)
Power supply indicator: PWR (P1, P2)
Power supply
DC Series
Input voltage: 12~48VDC
Support DC dual power supply redundancy
AC Series
Input voltage: 100~240VAC/DC
Type of input: 4 bit terminal block
Consumption
IES3016-P (12~48VDC):
Unload consumption: 4.83W@24VDC
Full load consumption: 7.30W@24VDC
IES3016-2F-P (12~48VDC):
Unload consumption:6.12W@24VDC
Full load consumption: 8.33W@24VDC
IES3016-4F-P (12~48VDC):
Unload consumption: 7.6W@24VDC
Full load consumption: 9.29W@24VDC
IES3016-6F-P (12~48VDC):
Unload consumption: 8.79W@24VDC
Full load consumption: 10.49W@24VDC
IES3016-8F-P (12~48VDC):
Unload consumption: 10.18W@24VDC
Full load consumption: 10.26W@24VDC
Working environment:
Working temperature: -40～75℃
Storage temperature:-40～85℃
Relative Humidity: 5%~95% (no condensation)
Mechanical Structure:
Shell: IP40 protect grade, metal shell
Installation: DIN-Rail
Size (W×H×D): 160mm×70mm×130mm
Industry Standard:
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Level 4
EN61000-4-3 (RS), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 4
EN61000-4-6 (CS), Level 3
EN61000-4-8, Level 5
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS, UL508 (Pending)
Warranty: 5 years