DTD RING 12 Kullanıcı El Kitabı - Sayfa 11

Dalış Aleti DTD RING 12 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DTD RING 12 18 sayfaları. Buoyancy compensator

Threading the waist belt strap through the buckle

Take the left side of the waist belt strap and thread through the individual holes

in the buckle, starting at the end hole (pic. 1, 2, 3). After we recommend securing

the strap by pulling it back through the first hole (pic. 4)

pic. 1

pic. 2

pic. 3

pic. 4

TIP:

Do not shorten the straps after the first fitting. Wait until you test your gear

in the water. You will be doing additional adjustments for 3 to 5 dives until the

gear is fitted properly on your back – as snug as is comfortable. Only then you

can shorten them to leave an extra 10 to 15 cm on each side. We recommend

finishing off the right side of the waist strap in an arc. When shortening straps

do not forget to finish them off properly so that they do not fray.

Revised – February 2020