DTF Seismo 11 Kullanıcı Kılavuzu - Sayfa 5
Kurutucu DTF Seismo 11 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DTF Seismo 11 7 sayfaları. Powder applicator & dryer
• Align the machine and the printer, so that the printer
feeds the print into the shaker.
• Place the media through the powder machine - refer
to the "Media Winding" section below.
• Flip the main power switch on the control panel.
• Flip the heat switch and set the temperature as
needed.
• Adjust speed of powder shaker motor.
• Set the upside dryer temperature between
100-170°C (Set according to the melting point of the
powder).
• Temperature of the leading heat plate should be
about 60°C - 70°C.
• After the media has finished, turn off the switches.
5. Media Winding
• Feed the media into the powder box through the
outside powder bar.
• Then, cross the space between the upside dryer
and the platform dryer.
4