Bourgault AccuSet Hızlı Referans Kılavuzu

Çiftlik Ekipmanları Bourgault AccuSet için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Bourgault AccuSet 2 sayfaları.

Welcome to the Quick Reference Guide for the AccuSet manual override operation for raising and

lowering the drill. Please refer to the Operator's Manual for complete instructions.

In the event that there is an issue with the Bourgault AccuSet Implement Controller ECU, that

prevents the raise and lower operation of the drill, there is a manual override harness provided

to by-pass the ECU.

Important: The intent of this harness is to act as an emergency service tool and should not replace

the operation of the ECU.

OVERRIDE

HARNESS

STORAGE

Bourgault AccuSet Implement Controller ECU (BIC ECU)

Using the AccuSet Manual

Override Harness

1. Ensure a safe state of the drill. Turn off all

hydraulics and remove the tractor key from

the ignition.

2. Carefully take the harness out of the storage

container and unfold.

3. Remove the harness connectors from CH 1,

2, 3, and PWR on the BIC ECU.

4. Plug these connectors into the Manual

Override Harness with their respective labels.

AccuSet Channels pair with CH's 1, 2, and

3 (order not important), and "AccuSet ECU

PWR" to ECU Power.

a. At each of the AccuSet hydraulic blocks at

the base of each axle, you need to unscrew

the Counterbalance Valves to permit the

QDA cylinder to rest on the shims.

P/N 0256-70-01

Assy P/N 0256-70-10

3335 AccuSet Manual Override Quick Reference Guide

POWER

CH1 CH2

CH3

Rocker switch

AccuSet Manual Override Harness

Page 1