Atus LBB6152/01 Kurulum Kılavuzu - Sayfa 7

Yerleştirme İstasyonu Atus LBB6152/01 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Atus LBB6152/01 9 sayfaları. Single storage rack, for paging receivers and ps-micro mobiles

Sayfayı Yazdır

Personal Security | Installation Manual

Recharging a paging receiver/PS-Micro mobile

To recharge the batteries of a paging receiver/PS-Micro mobile, simply place it in the recharging

bay of the storage rack. It will fit one way only. When the mobile is correctly seated, the

indicator LED

will illuminate clear.

Note: In order to charge the battery of paging receivers or PS-micro mobiles it

must be fitted with rechargeable batteries, and the switch, in the paging

receiver's or PS-micro mobile's battery compartment must be set

to the correct position for rechargeable batteries.

Refer to the relevant documentation

Mechanical

The housing of the rack is designed for desk top mounting. In case of a Paging receiver, the display (numerical or alpha-

numerical) and the LED are still visible while the receiver is in the rack. When SW1 is in the "Bleep-position' the volume of

the bleep will not be changed when the pager is placed in the rack. The design of the rack is such that it fits esthetically in

combination with the 'rack-family' as LBB 6150.

The mobile's contacts at the bottom fit automatically when it is put in. When the mobile is placed in the rack, a click

indicates good positioning of it.

Environmental data

Description

Temperature range

Relative humidity

Vibration and bump

Transport

Industrial climates

Susceptibility to radiation

Countries of destination

Safety

ESD

International Pagerservices B.V. | II_LBB615201_en_1817

Requirements

: operating

: storage and transport

: < 95 %

: the storage rack is suitable for indoor use

: the packed products are suited for normal worldwide transport by air, rail and road

: no special requirements.

: the storage rack still fulfills the requirements when it is placed in an EM-field with

a strength of 3 V/m with a frequency between 100 kHz -1000 MHz

: no special restrictions

: according to IEC65

: 8 kV at rack contact may not affect the operation

-10/+55°C

-40/+70°C

en | 7