DTM System DTM GO800 Montaj Talimatları Kılavuzu - Sayfa 3
Garaj Kapısı Açıcı DTM System DTM GO800 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. DTM System DTM GO800 12 sayfaları.
Sayfayı Yazdır· During the assembly or repair work of the automatic gate, be careful not to wear jewelry, watches
or loose clothing;
· Remove any locks installed on the gate to avoid damaging it, and remove all ropes and loops used to
open the gate manually;
· After installation, it is necessary to check that the mechanism is properly set and that the drive,
safety system and emergency unlocking work properly;
· The gate drive cannot be started and continue to operate when there is a wicket in the gate and it is
not properly closed;
· Crush or injury protection systems (e.g. photocell systems) must function properly after the drive is
installed and connected to the mains;
· The radio remote control may only be used when a safe force value is set;
· The radio remote control may only be used if it is possible to observe the gate movement and there
are no people or objects in the movement area;
More information in European Union documents:
EN 12453:20017-10
Gates. Safety of use of power operated doors.
Requirements and test methods.
EN 12604:2017-11
Gates . Mechanical aspects. Requirements and test methods.
EN 12978+A1:2012
Doors and gates. Safety devices for motorized doors and gates.
Requirements and test methods.
EN 12100:2012
Machine safety. General principles of design.
Risk assessment and risk reduction.
EN 60335-1:2012
Safety of electrical appliances for household and similar use.
General requirements.
3