ATZ HDMI-E200W Manuel - Sayfa 2

Genişletici ATZ HDMI-E200W için çevrimiçi göz atın veya pdf Manuel indirin. ATZ HDMI-E200W 10 sayfaları. Hdmi wireless extender 200m

Model

: ATZ HDMI-E200W

Description : HDMI Wireless Extender 200M

The extender uses TCP /IP standard Wireless Transport Protocol, so it has high

transmission rate and strong anti-interference capability. It has HDMI loop-out port with IR

capability to control source devices remotely. The HDMI Wireless Extender is widely

applicable for office presentation, lecture, education, conference, family entertainments

etc.

Features:

• Contains a transmitter (TX) and a receiver (RX). The HDMI signal over

wireless transmission from the transmitter to the receiver

• The TX support one HDMI loop output, for local screen monitor

• Support HDMI resolution: 480P~1080P@50/60Hz and SVGA~WUXGA

• Use the internationally accepted 5G ISM frequency band, high

transmission rate and strong anti-interference capability

• Using an external dual - gain antennas. Full HD 1080p transmits up to

200 meters wireless in open space.( May be affected by the use

environment)

• Extends wide-band infrared remote to control source device from display

side

• Support OSD, for informed of device status

• Simple Plug and Play, no software installation required

• Supports both panel settings and Web Configuration Interface, Simple

and easy to use

FEATURES OF THE INTERFACE:

Transmitter (TX)

CHANNEL

FIG.1 TX Front Panel View

POWER STATUS HDMI

IR OUT&RESET

HIGH-LOW

HDMI IN

HDMI OUT

FIG.2 TX Rear Panel View

DC5V