Comtrend Corporation WAP-5903 Hızlı Kurulum Kılavuzu - Sayfa 2
Genişletici Comtrend Corporation WAP-5903 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Comtrend Corporation WAP-5903 8 sayfaları. Ac1200 dual band wifi mesh-enhanced extender
Sayfayı Yazdır
Setup with a Comtrend Gateway that supports WifiXtend2.0™
a Comtrend Gateway that does not support WifiXtend2.0™
WifiXtend2.0™ is Comtrend's WiFi Mesh technology for enhanced whole-home WiFi coverage. The WAP-5903 and
select Comtend Gatways support WifiXtend2.0™. When WifiXtend2.0™ technologies are being utilized, the WiFi
network will automatically become a single network with one SSID and Password per band.
B
Scenario I: Setting up the WiFi Mesh Extender with a Comtrend Gateway that
Supports WifiXtend2.0™
1. Use the included Ethernet cable to connect one
end into the LAN port of the Comtrend Gateway
that supports WifiXtend2.0™ and the other end into
the UPLINK port of the WAP-5903.
2. Power on the WAP-5903 by connecting one end of
the Power Adapter into the Power Port of the WAP-
5903 and the other end into an outlet. The Ethernet
Pairing will automatically start processing and the
WAP-5903's LED will begin blinking green.
3. Wait until the WAP-5903's LED is solid green. This
means that the WAP-5903 is paired and grouped in
the same WiFi mesh network as the Comtrend
gateway.
4. If you are setting up more than one WAP-5903, then please follow instructions 1-3 with the additional WAP-
5903 units.
(Continue to Step B)
Setup with either a non-Comtrend Gateway or
(Continue to Step E)
Choose One
Scenario I:
Scenario II:
Power Plug
WAP-5903
Ethernet Cable
Comtrend Gateway
Page 2